[STDS-802-3-EPOC] FW: [STDS-802-3] 802.3 WG 3rd RECIRCULATION BALLOT: IEEE P802.3bn Ethernet Passive Optical Networks Protocol over Coax (EPoC) D2.2 ballot
Dear IEEE P802.3bn Task Force,
With this e-mail, I am forwarding David Law's announcement of the start of the IEEE P802.3bn/D2.3 EPoC Working Group 3rd recirculation ballot.
Open date: Wednesday 23rd December 2015
Close date: Saturday 16th January 2016 23:59 AOE
As stated in the attached announcement, the ballot group for this draft is the IEEE 802.3 voting membership as of Friday 17th July 2015. All comments received before the close of ballot will be considered, the one limitation however is that if you are not a member of the balloting group, and therefore cannot cast a ballot, you cannot designate comments as TR or ER since you cannot cast a Disapprove ballot.
NOTE: This is a recirculation ballot. YOU ONLY NEED TO CAST A BALLOT IF YOU WISH TO CHANGE YOUR VOTE FROM THAT WHICH WAS RECORDED ON THE INITIAL BALLOT OR LAST RECIRCULATION. If you voted previously and your vote has not changed, the last ballot cast will be carried over to this ballot and you do not need to cast a new ballot.
Yours truly,
Mark Laubach, Chair
IEEE P802.3bn EPoC PHY Task Force
Broadband Technology Group
Broadcom Corporation
1351 Redwood Way
Petaluma, CA, 94954
[broadcom.jpg]
Tel: +1.707.792.9093
Cell: +1.650.996.2219
Begin forwarded message:
From: "Law, David" <dlaw@xxxxxxx<mailto:dlaw@xxxxxxx>>
Date: December 22, 2015 at 12:57:23 PM EST
To: STDS-802-3@xxxxxxxxxxxxxxxxx<mailto:STDS-802-3@xxxxxxxxxxxxxxxxx>
Subject: [STDS-802-3] +++ 802.3 WG 3rd RECIRCULATION BALLOT: IEEE P802.3bn Ethernet Passive Optical Networks Protocol over Coax (EPoC) D2.3 ballot
Reply-To: "Law, David" <dlaw@xxxxxxx<mailto:dlaw@xxxxxxx>>
Dear Colleagues,
This is the announcement of the electronic IEEE 802.3 Working Group 3rd recirculation ballot on the Amendment IEEE P802.3bn Ethernet Passive Optical Networks Protocol over Coax (EPoC). Remember that voting, as well as attendance, is a requirement to maintain your IEEE 802.3 member (voter) status <http://ieee802.org/3/rules/member.html#DOT3>. Instructions for accessing the draft, casting your ballot and submitting comments follow this announcement. Note that the options for submitting comments HAVE BEEN UPDATED, please review the commenting instructions below to ensure you are using the most up to date tools.
The ballot group for this draft is the IEEE 802.3 voting membership as of Friday 17th July 2015.
Because this is a recirculation ballot, YOU ONLY NEED TO CAST A BALLOT IF YOU WISH TO CHANGE YOUR VOTE FROM THAT WHICH WAS RECORDED ON THE INITIAL BALLOT OR LAST RECIRCULATION. If you voted previously and your vote has not changed, the last ballot cast will be carried over to this ballot and you do not need to cast a new ballot.
BALLOT SCOPE:
During this IEEE 802.3 Working Group 3rd recirculation ballot, the scope of the ballot is the substantive changes between IEEE P802.3bn/D2.3 and IEEE P802.3bn/D2.2 and the unsatisfied negative comments from the 2nd recirculation ballot.
FIVE CRITERIA:
One of the responsibilities as a balloter is to ensure that draft is consistent with the 5 Criteria responses which are available at <http://ieee802.org/3/bn/5Criteria.pdf>. An Approve vote indicates your agreement that the draft is consistent with the 5 Criteria responses.
BALLOT OPEN:
Wednesday 23rd December 2015
BALLOT CLOSE:
Saturday 16th January 2016 23:59 AOE
The Project Authorization Request for this Amendment is available at <http://ieee802.org/3/bn/P802.3bn.pdf> and includes the following:
TITLE:
IEEE Standard for Ethernet Amendment: Physical Layer Specifications and Management Parameters for Ethernet Passive Optical Networks Protocol over Coax
SCOPE OF PROJECT:
The project is to amend IEEE Std 802.3 to add physical layer specifications and management parameters for symmetric and/or asymmetric operation of up to 10 Gb/s on point-to-multipoint Radio Frequency (RF) distribution plants comprising either amplified or passive coaxial media. It also extends the operation of Ethernet Passive Optical Networks (EPON) protocols, such as MultiPoint Control Protocol (MPCP) and Operation Administration and Management (OAM).
NEED FOR THE PROJECT:
The project is applicable to environments served with hybrid fiber-coax (HFC) networks. This project would allow the expansion of the addressable Ethernet market in the access space by running the EPON protocol over Coax. The project enables service providers to offer EPON services over HFC networks, which currently can only be provided on a fiber network.
Thank you for your participation in this ballot and careful review of the draft.
David Law
Chair, IEEE 802.3 Ethernet Working Group
Phone: +44 1631 563729
Email: david_law@xxxxxxxx<mailto:david_law@xxxxxxxx>
Mark Laubach
Chair, IEEE P802.3bn Ethernet Passive Optical Networks Protocol over Coax (EPoC) Task Force
Phone: +1 650 996 2219
Email: laubach@xxxxxxxxxxxx<mailto:laubach@xxxxxxxxxxxx>
----------------------------------------------------------------
INSTRUCTIONS FOR BALLOTING ON: IEEE P802.3bn draft D2.3
Instructions for accessing the ballot documents, casting your ballot and submitting comments follow.
HOW TO ACCESS THE DRAFT
The draft is posted for your review for balloting purposes only, and neither the draft nor access information should be copied or redistributed to others in violation of document copyrights.
The IEEE P802.3bn Ethernet Passive Optical Networks Protocol over Coax (EPoC) draft D2.3 may be downloaded from:
URL: <http://ieee802.org/3/bn/private/Drafts/P802d3bn_d23.pdf>
Please submit comments against the above draft.
A comparison file between IEEE P802.3bn Ethernet Passive Optical Networks Protocol over Coax (EPoC) draft D2.2 and D2.3 is also provided to both focus and ease your review. Please DO NOT comment on this comparison document. This draft may be downloaded from:
<http://ieee802.org/3/bn/private/Drafts/P802d3bn_d23_cmp.pdf>
Please DO NOT submit comments against the above document.
Unsatisfied negative comments, and their dispositions, from the 2nd recirculation ballot may be downloaded from:
<http://www.ieee802.org/3/bn/comments/P802d3bn_D2p2_comments_unresolved_151222.pdf>
All comments, and their dispositions, from the 2nd recirculation ballot may be downloaded from:
<http://www.ieee802.org/3/bn/comments/P802d3bn_D2p2_comments_final_Cl.pdf>
These documents are posted in Adobe "pdf" document format and can be downloaded and printed if desired. If you do not have Adobe Acrobat Reader, it may be downloaded for free downloading from Adobe from:
<http://www.adobe.com/prodindex/acrobat/readstep.html>
HOW TO CAST YOUR BALLOT
To assure your ballot is counted, please:
1) Send your ballot to: stds-802-3-ballot@xxxxxxxx<mailto:stds-802-3-ballot@xxxxxxxx>
2) Paste the following line into the subject field:
IEEE P802.3bn Ethernet Passive Optical Networks Protocol over Coax (EPoC) D2.3 ballot
This can be done with this link <mailto:stds-802-3-ballot@xxxxxxxx?subject=IEEE%20P802.3bn%20Ethernet%20Passive%20Optical%20Networks%20Protocol%20over%20Coax%20(EPoC)%20D2.3%20ballot>
3) Paste into the message body and complete the ballot form below:
-----CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------
IEEE P802.3bn Ethernet Passive Optical Networks Protocol over Coax (EPoC) D2.3 ballot
Your Name:___________________________
___ APPROVE ALL WITHOUT COMMENT
___ APPROVE ALL WITH COMMENTS on SOME
(All comments are non-binding)
___ DISAPPROVE
(Some or all comments are binding; a voter must attach specific comments for remedy)
___ ABSTAIN, Lack of Expertise
___ ABSTAIN, Lack of Time
-----------------------end ballot form--------------------
HOW TO SUBMIT COMMENTS
Acceptable comment types:
E = Editorial
ER = Editorial Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member)
T = Technical
TR = Technical Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member)
1. Prepare your comments in one of the following three ways. You are STRONGLY REQUESTED to use either the comment tool or spreadsheet. A comment entry tutorial is available at <http://ieee802.org/3/ballots/p802d3_comment_entry_tutorial_v1p0.pdf>.
a. Access the comment tool at the URL (last updated 16th September 2015):
1. Prepare your comments in one of the following three ways. You are STRONGLY REQUESTED to use either the comment tool or spreadsheet. A comment entry tutorial is available at <http://ieee802.org/3/ballots/p802d3_comment_entry_tutorial_v1p0.pdf>.
a. Access the comment tool at the URL (last updated 16th September 2015):
<http://www.ieee802.org/3/WG_tools/filemaker/Generic_Commenting_Tool_FM.zip>
To use the tool, extract all components into a folder and do not move any component from that folder as this will cause the executable to not work correctly. The tool is:
Comment_Tool_Generic_Solution.exe
b. Access the comment spreadsheet at the URL:
<http://www.ieee802.org/3/WG_tools/spreadsheet/802d3_TFR_WGB_comments.xls>
c. To submit comments in text (ASCII) form, please use the form below. This will make it possible for the editor to properly record and track all submissions. Make as many copies of the template as necessary and submit as an ASCII text file or as part of your e-mail.
PLEASE NOTE: The ASCII method involves a manual transcription, hence you are recommended to check your comments to ensure accurate transcription when the comment file is made available. Please use one of the comment tools above if possible.
------CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------
CommentID: (Leave Blank)
CommenterName:
CommenterEmail:
CommenterPhone:
CommenterCellPhone:
CommenterCompany:
Clause:
Subclause:
Page:
Line:
CommentType: (E, ER, T, or TR)
Comment:
CommentEnd:
SuggestedRemedy:
RemedyEnd:
--------------------end comment template------------------
2. Send your comments to: stds-802-3-ballot@xxxxxxxx<mailto:stds-802-3-ballot@xxxxxxxx> and paste into the subject line:
IEEE P802.3bn Ethernet Passive Optical Networks Protocol over Coax (EPoC) D2.3 comments
This can be done with this link <mailto:stds-802-3-ballot@xxxxxxxx?subject=IEEE%20P802.3bn%20Ethernet%20Passive%20Optical%20Networks%20Protocol%20over%20Coax%20
________________________________________________________________________
To unsubscribe from the STDS-802-3-EPOC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-EPOC&A=1
