Re: [HSSG] <HSSG-FO> Fiber Optic Ad Hoc Teleconference 12/18/2006 - NEW BRIDGE #

[Jack Jewell <Jack.Jewell@xxxxxxxxxxxxx>]

Title: Message

Heve there been any 20-25G 1550nm links over 10km with DML?  I thought laser chirp was too high even at 10G.

Jack

---

From: Dove, Dan [mailto:dan.dove@HP.COM]
Sent: Monday, December 18, 2006 10:36 AM
To: STDS-802-3-HSSG@listserv.ieee.org
Subject: Re: [HSSG] <HSSG-FO> Fiber Optic Ad Hoc Teleconference 12/18/2006 - NEW BRIDGE #

 

 Xavier,

 

 Your message contained a Confidential Disclosure statement which is restricted from the reflector. I am putting  your suggestion  on the reflector now.

 

Regards,

Dan

 

------------ Previous Message Below ------------

 

---

From: Xavier Clairardin [mailto:xclairardin@kotura.com]
Sent: Monday, December 18, 2006 9:29 AM
To: Dove, Dan
Subject: RE: [HSSG] <HSSG-FO> Fiber Optic Ad Hoc Teleconference 12/18/2006 - NEW BRIDGE #
Importance: High

Hi Dan,

 

I have tried to send the message below through the reflector but it was rejected (I am probably not doing it correctly)

=====================================================================================================

 

Hi everyone,

 

Along the same line as proposed by Eddie Tsumura, we would like to proposed that the following solutions be added to the table of potential solutions. Some of these solutions have actually been demonstrated over 10km .

 

 

Objective	l	# Lanes	~Lane Rate (Gb/s)	Source	Mux	Grid
10km SMF	1550 nm	5	20	Un-cooled DML/EML	CWDM	20 nm G.694.2
	1550 nm	4	25	Un-cooled DML/EML	CWDM	20 nm G.694.2
	1550 nm	5	20	Cooled EML	CWDM	20 nm G.694.2

 

1550 nm certainly offers better path to future upgradeability.

 

Thank you

 

 

Xavier F. Clairardin

Director of Business Development

Corporate Strategy Advisor

Kotura 

630-460-3147 (cell)

626-236-4509 (Fax)

xclairardin@kotura.com