Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[STDS-802-3-MAINT] IEEE P802.3cq/D2.1 Power over Ethernet over 2 Pairs (Maintenance #13) Working Group 1st recirculation ballot

Dear Task Force Participants,

 

With this e-mail, I'd like to announce the start of the IEEE P802.3cq/D2.1 Power over Ethernet over 2 Pairs (Maintenance #13) Working Group 1st RECIRCULATION ballot.

 

Open date: Monday 3rd June 2019

Close date: Monday 17th June 2019 23:59 AOE

 

As stated in the attached announcement, the ballot group for this draft is the IEEE 802.3 voting membership as of Monday 1st April 2019. All comments received before the close of ballot will be considered, the one limitation however is that if you are not a member of the balloting group, and therefore cannot cast a ballot, you cannot designate comments as TR or ER since you cannot cast a Disapprove ballot.

 

Best regards,

Chad Jones

Chair, IEEE P802.3cq Power over Ethernet over 2 Pairs (Maintenance #13) Task Force 

 

To unsubscribe from the STDS-802-3-MAINT list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-MAINT&A=1

--- Begin Message --- 
Dear Colleagues,

This is the announcement of the electronic IEEE 802.3 Working Group 1st recirculation ballot on the Amendment IEEE P802.3cq Power over Ethernet over 2 Pairs (Maintenance #13). Remember that voting, as well as attendance, is a requirement to maintain your IEEE 802.3 member (voter) status <http://ieee802.org/3/rules/member.html#DOT3>. Instructions for accessing the draft, casting your ballot and submitting comments follow this announcement. Please review the commenting instructions below to ensure you are using the most up to date tools.

The ballot group for this draft is the IEEE 802.3 voting membership as of Monday 1st April 2019.

Because this is a recirculation ballot, YOU ONLY NEED TO CAST A BALLOT IF YOU WISH TO CHANGE YOUR VOTE FROM THAT WHICH WAS RECORDED ON THE INITIAL BALLOT OR LAST RECIRCULATION. If you voted previously and your vote has not changed, the last ballot cast will be carried over to this ballot and you do not need to cast a new ballot.

BALLOT SCOPE:
During this IEEE 802.3 Working Group 1st recirculation ballot, the scope of the ballot is the substantive changes between IEEE P802.3cq/D2.0 and IEEE P802.3cq/D2.1. There are no unsatisfied negative comments.

BALLOT OPEN:
Monday 3rd June 2019

BALLOT CLOSE:
Monday 17th June 2019 23:59 AOE

The Project Authorization Request for this Amendment is available at <http://www.ieee802.org/3/cq/P802d3cq_PAR.pdf> and includes the following:

TITLE:
Standard for Ethernet Amendment: Maintenance #13: Power over Ethernet over 2 pairs

SCOPE OF PROJECT:
This project will implement editorial and technical corrections, refinements, and clarifications to Clause 33, Power over Ethernet over 2 pairs, and related portions of the standard. No new features will be added by this project.

NEED FOR THE PROJECT:
Editorial and technical issues have been identified in Clause 33. These issues need to be addressed to improve the accuracy and clarity of the standard.

Thank you for your participation in this ballot and careful review of the draft.

David Law
Chair, IEEE 802.3 Ethernet Working Group
Phone: +44 1631 563729
Email: david_law@xxxxxxxx 

Chad Jones
Chair, IEEE P802.3cq Power over Ethernet over 2 Pairs (Maintenance #13) Task Force
Phone: +1 330 861 8521
Email: cmjones@xxxxxxxxx

----------------------------------------------------------------

INSTRUCTIONS FOR BALLOTING ON: IEEE P802.3cq draft D2.1

Instructions for accessing the ballot documents, casting your ballot and submitting comments follow.

HOW TO ACCESS THE DRAFT
The draft is posted for your review for balloting purposes only, and neither the draft nor access information should be copied or redistributed to others in violation of document copyrights.

The IEEE P802.3cq Power over Ethernet over 2 Pairs (Maintenance #13) draft D2.1 may be downloaded from:

URL: <http://www.ieee802.org/3/private/maint/cqballot/8023cq_D2p1.pdf>
Username: *****
Password: *****

Please submit comments against the above draft.

A comparison file between IEEE P802.3cq Power over Ethernet over 2 Pairs (Maintenance #13) draft D2.0 and D2.1 is also provided to both focus and ease your review. Please DO NOT comment on this comparison document. This draft may be downloaded from:

<http://www.ieee802.org/3/private/maint/cqballot/8023cq_D2p1_DIFF_D2p0.pdf>

Please DO NOT submit comments against the above document.


All comments, and their dispositions, from the initial ballot may be downloaded from:

<http://grouper.ieee.org/groups/802/3/cq/comments/802d3cq_D2p0_FINAL_DraftOrder.pdf>

These documents are posted in Adobe "pdf" document format and can be downloaded and printed if desired. If you do not have Adobe Acrobat Reader, it may be downloaded for free downloading from Adobe from:

<http://www.adobe.com/prodindex/acrobat/readstep.html>


HOW TO CAST YOUR BALLOT

To assure your ballot is counted, please:

1) Send your ballot to: stds-802-3-ballot@xxxxxxxx

2) Paste the following line into the subject field:

IEEE P802.3cq Power over Ethernet over 2 Pairs (Maintenance #13) D2.1 ballot
	
This can be done with this link <mailto:stds-802-3-ballot@xxxxxxxx?subject=IEEE%20P802.3cq%20Power%20over%20Ethernet%20over%202%20Pairs%20(Maintenance%20#13)%20D2.1%20ballot>

3) Paste into the message body and complete the ballot form below:

-----CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------

IEEE P802.3cq Power over Ethernet over 2 Pairs (Maintenance #13) D2.1 ballot

Your Name:___________________________
 
 
 ___ APPROVE ALL WITHOUT COMMENT
 
 ___ APPROVE ALL WITH COMMENTS on SOME
       (All comments are non-binding)
 
 ___ DISAPPROVE
       (Some or all comments are binding; a voter must submit specific comments for remedy)
 
 ___ ABSTAIN, Lack of Expertise
 
 ___ ABSTAIN, Lack of Time
 
 
-----------------------end ballot form--------------------

HOW TO SUBMIT COMMENTS

Acceptable comment types:

E = Editorial
ER = Editorial Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member)
T = Technical
TR = Technical Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member)

1. Prepare your comments in one of the following three ways. You are STRONGLY REQUESTED to use either the comment tool or spreadsheet. A comment entry tutorial is available at: 

<http://ieee802.org/3/ballots/p802d3_comment_entry_tutorial_v1p0.pdf> 

a. Access the comment tool at the URL:

<http://www.ieee802.org/3/WG_tools/filemaker/Generic_Commenting_Tool_FM.zip>

To use the tool, extract all components into a folder and do not move any component from that folder as this will cause the executable to not work correctly. The tool is:

Comment_Tool_Generic_Solution.exe

b. Access the comment spreadsheet at the URL:

<http://www.ieee802.org/3/WG_tools/spreadsheet/802d3_TFR_WGB_comments.xls>

c. To submit comments in text (ASCII) form, please use the form below. This will make it possible for the editor to properly record and track all submissions. Make as many copies of the template as necessary and submit as an ASCII text file or as part of your e-mail.

PLEASE NOTE: The ASCII method involves a manual transcription, hence you are recommended to check your comments to ensure accurate transcription when the comment file is made available. Please use one of the comment tools above if possible.
 
 ------CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------

 CommentID: (Leave Blank)
 CommenterName:
 CommenterCompany:
 Clause:
 Subclause:
 Page:
 Line:
 CommentType: (E, ER, T, or TR)
 Comment:
 CommentEnd:
 SuggestedRemedy:
 RemedyEnd:

 --------------------end comment template------------------

2. Send your comments to: stds-802-3-ballot@xxxxxxxx and paste into the subject line:

IEEE P802.3cq Power over Ethernet over 2 Pairs (Maintenance #13) D2.1 comments

This can be done with this link <mailto:stds-802-3-ballot@xxxxxxxx?subject=IEEE%20P802.3cq%20Power%20over%20Ethernet%20over%202%20Pairs%20(Maintenance%20#13)%20D2.1%20comments>

________________________________________________________________________
To unsubscribe from the STDS-802-3 list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3&A=1

--- End Message ---