| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
Dear Colleagues:
This is the announcement of the review of the IEEE P802.3cr Isolation (Maintenance
#14) Task Force draft amendment D1.1. Instructions for accessing the draft and submitting comments follow this announcement.
IEEE P802.3cr is an amendment to IEEE Std 802.3-2018 which is available through the “Get 802” program at the URL:
http://standards.ieee.org/getieee802/802.3.html
The Project Authorization Request for this amendment is posted at:
http://www.ieee802.org/3/cr/P802.3cr_PAR.pdf
___________________________________________
REVIEW SCOPE:
The scope of the review is the entire IEEE P802.3cr D1.1 Draft.
REVIEW OPEN:
Monday, 7
October 2019
REVIEW CLOSE:
Tuesday, 22
October 2019, Midnight AOE (The intention is for comments to be in my inbox Wednesday morning.)
-------------------------------------------------------------------------
HOW TO ACCESS THE DRAFT
The draft is posted for Task Force review purposes only, and neither the draft nor access information should be copied or redistributed to others in violation of document copyrights.
Draft 1.1 should be used for commenting and may be downloaded from:
URL: http://www.ieee802.org/3/private/maint/crballot/8023cr_D1p1.pdf
This documents are in the password protected IEEE P802.3cr private area.
Username and password: distributed at meetings
The documents are posted in Adobe "pdf" document format and can be downloaded and printed if desired. If you do not have Adobe Acrobat Reader, it is available for free downloading
from Adobe at:
URL: http://www.adobe.com/prodindex/acrobat/readstep.html
_______________________________________
HOW TO SUBMIT COMMENTS
Acceptable comment types:
E = Editorial
T = Technical
1. Prepare your comments in one of the following three ways. You are STRONGLY REQUESTED to use the spreadsheet.
The comment tool would be the second choice.
A comment entry tutorial is available at:
<http://ieee802.org/3/ballots/p802d3_comment_entry_tutorial_v1p0.pdf>
a. Access the comment spreadsheet at the URL (PREFERRED):
<http://www.ieee802.org/3/WG_tools/spreadsheet/802d3_TFR_WGB_comments.xls>
b. Access the comment tool at the URL:
<http://www.ieee802.org/3/WG_tools/filemaker/Generic_Commenting_Tool_FM.zip>
To use the tool, extract all components into a folder and do not move any component from that folder as this will cause the executable to not work correctly. The tool is:
Comment_Tool_Generic_Solution.exe
c. To submit comments in text (ASCII) form, please use the form below. This will make it possible for the editor to properly record and track all submissions. Make as many copies of the template as necessary and submit
as an ASCII text file or as part of your e-mail.
PLEASE NOTE: The ASCII method involves a manual transcription; hence you are recommended to check your comments to ensure accurate transcription when the comment file is made available. Please use one of the comment
tools above if possible.
------CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------
CommentID: (Leave Blank)
CommenterName:
CommenterEmail:
CommenterPhone:
CommenterCellPhone:
CommenterCompany:
Clause:
Subclause:
Page:
Line:
CommentType: (E,
Comment:
CommentEnd:
SuggestedRemedy:
RemedyEnd:
--------------------end comment template------------------
2. Send your comments to: jon.lewis@xxxxxxxx and paste into the subject line:
IEEE P802.3cr Isolation (Maintenance #14) Task
Force D1.1 comments
Be sure to make the filename of your comment file unique by appending your name to the filename.
_____________________________________________________________
Thank you for your participation and careful review of the draft.
Jon Lewis |
Chair P802.3cr To unsubscribe from the STDS-802-3-MAINT list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-MAINT&A=1 |