| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Dear Task Force Participants, With this e-mail, I'd like to announce the start of the IEEE P802.3.2 (IEEE 802.3.2a)/D1.0 Ethernet YANG Data Model Definitions (revision) Working Group initial ballot. Open date: Monday 20th November 2023 Close date: Wednesday 20th December 2023 23:59 AOE As stated in the announcement below, the ballot group for this draft is the IEEE 802.3 voting membership as of Monday 20th November 2023. All comments received before the close of ballot will be considered, the one limitation however is that if you are not a member of the balloting group, and therefore cannot cast a ballot, you cannot designate comments as TR or ER since you cannot cast a Disapprove ballot. Best regards, Marek Hajduczenia Chair, IEEE P802.3.2 (IEEE 802.3.2a) Ethernet YANG Data Model Definitions (revision) Task Force ================================ Dear Colleagues, This is the announcement of the electronic IEEE 802.3 Working Group initial ballot of the amendment IEEE P802.3.2 (IEEE 802.3.2a) Ethernet YANG Data Model Definitions (revision). Remember that voting, as well as attendance, is a requirement to maintain your IEEE 802.3 member (voter) status <http://ieee802.org/3/rules/member.html#DOT3>. Instructions for accessing the draft, casting your ballot and submitting comments follow this announcement. Please review the commenting instructions below to ensure you are using the most up to date tools. The ballot group for this draft is the IEEE 802.3 voting membership as of Monday 20th November 2023. BALLOT SCOPE: As a Working Group initial ballot, the scope of the ballot is the complete IEEE P802.3.2 (IEEE 802.3.2a) draft. BALLOT OPEN: Monday 20th November 2023 BALLOT CLOSE: Wednesday 20th December 2023 23:59 AOE The Project Authorization Request for this Amendment is available at <https://ieee802.org/3/2/a/P802d3d2_PAR.pdf> and includes the following: TITLE: Standard for Ethernet - YANG Data Model Definitions SCOPE OF PROJECT: This standard defines YANG data models for IEEE Std 802.3 Ethernet. NEED FOR THE PROJECT: This revision is to addresses accumulated maintenance changes as well as appropriate updates to the IEEE Std 802.3.2 YANG modules to support IEEE Std 802.3 amendments published since IEEE Std 802.3.2 was first published. Thank you for your participation in this ballot and careful review of the draft. David Law Chair, IEEE 802.3 Ethernet Working Group Phone: +44 1631 563729 Email: david_law@xxxxxxxx Marek Hajduczenia Chair, IEEE P802.3.2 (IEEE 802.3.2a) Ethernet YANG Data Model Definitions (revision) Task Force Phone: +1 720 536 1366 Email: marek.hajduczenia@xxxxxxxxxxx ---------------------------------------------------------------- INSTRUCTIONS FOR BALLOTING ON: IEEE P802.3.2 (IEEE 802.3.2a) draft D1.0 Instructions for accessing the ballot documents, casting your ballot and submitting comments follow. HOW TO ACCESS THE DRAFT The draft is posted for your review for balloting purposes only, and neither the draft nor access information should be copied or redistributed to others in violation of document copyrights. The IEEE P802.3.2 (IEEE 802.3.2a) Ethernet YANG Data Model Definitions (revision) draft D1.0 may be downloaded from: Draft URL: <https://www.ieee802.org/3/2/a/private/802.3.2a.D1.0.pdf> Machine readable YANG modules: <https://www.ieee802.org/3/2/a/private/802.3.2a.D1.0.yang.zip> This document is posted in Adobe "pdf" document format and can be downloaded and printed if desired. If you do not have Adobe Acrobat Reader, it is available for free downloading from: <http://www.adobe.com/prodindex/acrobat/readstep.html> HOW TO CAST YOUR BALLOT To assure your ballot is counted, please: 1) Send your ballot to: stds-802-3-ballot@xxxxxxxx 2) Paste the following line into the subject field: IEEE P802.3.2 (IEEE 802.3.2a) Ethernet YANG Data Model Definitions (revision) D1.0 ballot This can be done with this link <mailto:stds-802-3-ballot@xxxxxxxx?subject=IEEE%20P802.3.2%20(IEEE%20802.3.2a)%20Ethernet%20YANG%20MIB%20(revision)%20D1.0%20ballot> 3) Paste into the message body and complete the ballot form below: -----CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE-------- IEEE P802.3.2 (IEEE 802.3.2a) Ethernet YANG Data Model Definitions (revision) D1.0 ballot Your Name:___________________________ ___ APPROVE ALL WITHOUT COMMENT ___ APPROVE ALL WITH COMMENTS on SOME (All comments are non-binding) ___ DISAPPROVE (Some or all comments are binding; a voter must submit specific comments for remedy) ___ ABSTAIN, Lack of Expertise ___ ABSTAIN, Lack of Time -----------------------end ballot form-------------------- HOW TO SUBMIT COMMENTS Acceptable comment types: E = Editorial ER = Editorial Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member) T = Technical TR = Technical Required (a binding comment that is part of a DISAPPROVE vote, therefore only appropriate for an IEEE 802.3 voting member) 1. Prepare your comments in one of the following two ways. You are STRONGLY REQUESTED to use the spreadsheet. A comment entry tutorial is available at: <http://ieee802.org/3/ballots/p802d3_comment_entry_tutorial.pdf> a. Access the comment spreadsheet at the URL: <http://www.ieee802.org/3/WG_tools/spreadsheet/802d3_TFR_WGB_comments.xls> b. To submit comments in text (ASCII) form, please use the form below. This will make it possible for the editor to properly record and track all submissions. Make as many copies of the template as necessary and submit as an ASCII text file or as part of your e-mail. PLEASE NOTE: The ASCII method involves a manual transcription; hence you are recommended to check your comments to ensure accurate transcription when the comment file is made available. Please use one of the comment tools above if possible. ------CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE-------- CommentID: (Leave Blank) CommenterName: CommenterCompany: Clause: Subclause: Page: Line: CommentType: (E, ER, T, or TR) Comment: CommentEnd: SuggestedRemedy: RemedyEnd: --------------------end comment template------------------ 2. Send your comments to: stds-802-3-ballot@xxxxxxxx and paste into the subject line: IEEE P802.3.2 (IEEE 802.3.2a) Ethernet YANG Data Model Definitions (revision) D1.0 comments This can be done with this link <mailto:stds-802-3-ballot@xxxxxxxx?subject=IEEE%20P802.3.2%20(IEEE%20802.3.2a)%20Ethernet%20YANG%20MIB%20(revision)%20D1.0%20comments> To unsubscribe from the STDS-802-3-MAINT list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-MAINT&A=1 To unsubscribe from the STDS-802-YANG list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-YANG&A=1 |