Thread Links			Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

[8023-POEP] PoE device grounding

To: STDS-802-3-POEP@xxxxxxxxxxxxxxxxx
Subject: [8023-POEP] PoE device grounding
From: Joe Malin <malin_joe@xxxxxxxxx>
Date: Fri, 28 Apr 2006 06:03:47 -0700
Approved-By: David_Law@xxxxxxxx
List-Help: <http://listserv.ieee.org/cgi-bin/wa?LIST=STDS-802-3-POEP>, <mailto:LISTSERV@xxxxxxxxxxxxxxxxx?body=INFO STDS-802-3-POEP>
List-Owner: <mailto:STDS-802-3-POEP-request@xxxxxxxxxxxxxxxxx>
List-Subscribe: <mailto:STDS-802-3-POEP-subscribe-request@xxxxxxxxxxxxxxxxx>
List-Unsubscribe: <mailto:STDS-802-3-POEP-unsubscribe-request@xxxxxxxxxxxxxxxxx>
Reply-To: Joe Malin <malin_joe@xxxxxxxxx>
Sender: owner-stds-802-3-poep@xxxxxxxx

Hello,

I want to install system with PoE CCTV cameras, using STP cable terminated at a patch panel, and then connected to a PoE switch. My PoE switch is grounded to common ground. Do I need to ground the STP cable at the patch panel to common ground, or would this introduce gound loops?

What is the accepted current practice for this type of install?

Thanks

Joe

Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1¢/min.

Prev by Date: IEEE 802.3au (IEEE P802.3-2005/Cor 1) update
Next by Date: Re: [8023-POEP] Power management discussions during ad-hoc
Prev by thread: IEEE 802.3au (IEEE P802.3-2005/Cor 1) update
Next by thread: Re: [8023-POEP] Power management discussions during ad-hoc
Index(es):
- Date
- Thread