Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Yair, I think you missed the point. The solution is NOT to “…mandate
separate signatures for each 2P…” because we also want “medium
power” on 2P. The Task Force already agreed to this. So there will be some PDs in the 15W to
30W(?) range that have an input structure like an Af-PD (SS with diode bridges). The obvious upgrade path for a user would
be to add a medium-power At-midspan in-line with his existing Af-endspan.
These two PSEs can’t share the load since the PD is SS. So the At-midspan
has to supplant (take the place of) the Af-endspan. I showed a method to assure the midspan
will power the MP PD every time. I think this will be essential to the
802.3at standard. Steve From: Steve and all, The problem shown in this presentation can
be easily solved by mandating detection and classification signature for every 2P
in the PD. Specifically separate signatures for each
2P and not a common one as measured at the RJ45. See attached presentation in page 13 for
the proposed scope of work. This is the idea of how standard can be
simplified. Doing the above is not requiring any
special specifications from the PSE. The Endspan PSE will detect and classify
pair A. The Midspan PSE will detect and classify
pair B. Both channels will turned on within the
current 802.3af timings or similar to it. Since each channel A and B are not tied
together at the diode bridge output, the PD can be operated easily by using the
PD circuitry which is TBD (implementation independent). Yair From:
owner-stds-802-3-poep@xxxxxxxx [mailto:owner-stds-802-3-poep@xxxxxxxx] On Behalf Of Guys, I think I’ve solved another problem that’s
inherent with DS. See the attached pdf. (Only about 10 more tough
problems to go!) I’d sure appreciate some comments. Steve |