Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [8023-POEP] System Architecture

Title: System Architecture
Yair,
 
When I said I support DS, this is the context for which I support it. Putting the complexity for dealing with High Power into the High Power 4P PD is where I see the most sensible allocation of complexity.
 
This way, each 2P PSE sees the load for which it will be responsible for powering.
 
Now, if someone attaches a 4P PD to a 2P PSE only, it must either be able to come up on the available 2P power with a reduced functionality set, or it will just receive power but not operate. That is also an implementation issue.
 
Dan
 
------------ Previous Message Below ------------
 

From: owner-stds-802-3-poep@xxxxxxxx [mailto:owner-stds-802-3-poep@xxxxxxxx] On Behalf Of Yair Darshan
Sent: Tuesday, June 13, 2006 4:15 PM
To: STDS-802-3-POEP@xxxxxxxxxxxxxxxxx
Subject: [8023-POEP] System Architecture

Hi all,

Please find my action item for tomorrow's meeting.

It is revised presentation from May meeting that focus on the concept 4P=2x2P and the more general case of N Pairs = Nx2P..

Please feel free to comment.

Thanks

<<Flexible PD implementation driven Architecture 002.pdf>>

Yair

Darshan Yair
Chief  Engineer
PowerDsine Ltd.  -  The Power over Ethernet Pioneers

1 Hanagar St., P.O. Box 7220
Neve Ne'eman Industrial Zone
Hod Hasharon 45421, Israel
Tel:  +972-9-775-5100, Cell: +972-54-4893019
Fax: +972-9-775-5111

E-mail: <mailto:yaird@xxxxxxxxxxxxxx>.  
<http://www.powerdsine.com>