Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Hi
all, I
am looking for information regarding the following: Assuming
PHY without any special algorithms for enhancing signal detection ability, what
is the minimum signal amplitude required at the PHY receiver input, in order to
have significant chance that it will be detected properly. Again,
all of the above is without any supporting signal processing techniques. It
is actually the receiver hardware sensitivity for signal above noise level. This
information is required to the work of the IEEE802.3at ad hocs. Thanks
Yair
Analog Mixed Signal Group Microsemi Corporation
Cell: +972-54-4893019 E-mail: <mailto:ydarshan@microsemi.com>. |