Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Gerry,
thanks for that information and help.
The more testing, the better.
- Rick
-----Original Message-----
From: Gerard Nadeau [SMTP:grn@xxxxxxxxxxx]
Sent: Wednesday, September 27, 2000 1:35 PM
To: Brooks, Rick [SC5:321:EXCH]; stds-802-3-pwrviamdi
Cc: elynskey; Rupert Dance
Subject: RE: hazard matrix testing
Rick
When Mike McCormack comes to UNH in early October I was planning on going
through the lab and plugging into anything with an RJ-45 including, Ethernet
(10, 100, 1000), Token Ring, FDDI, VGAnyLAN (if we have any left), test
equipment like the Fluke One Touch and DSP2000 and 4000, wireless access
points (yeah I know, its Ethernet), ATM, T1, etc...This should cover the
non-Ethernet RJ-45 devices along with a lot of legacy Ethernet devices.
Mike, when do want to come up? It looks like I will not be here October 5th
and 6th but I can have someone available to show you around.
Gerry
--------------------------------------------------
Gerard Nadeau
Fast Ethernet Consortium Manager
Gigabit Ethernet Consortium Manager
InterOperability Lab
24 Colovos Road
Jere Chase OE Room 201
Durham, NH 03824-3525 603-862-0166
http://www.iol.unh.edu 603-862-0898 (FAX)
--------------------------------------------------
-----Original Message-----
From: owner-stds-802-3-pwrviamdi@xxxxxxxx
[mailto:owner-stds-802-3-pwrviamdi@xxxxxxxx]On Behalf Of Rick Brooks
Sent: Wednesday, September 27, 2000 3:15 PM
To: stds-802-3-pwrviamdi@xxxxxxxx
Subject: hazard matrix testing
I am wondering who would be willing to help test the various discovery
methods against a wider range
of non-Ethernet devices, based on the hazard matrix chart.
So far, most of this testing has been related to finding what devices might
fool the discovery processes.
But, we also need to test for what happens when we plug a non-Ethernet RJ-45
device (that also supplies power)
into a PSE with a given detection scheme. Does any damage occur?
Also, we probably need more testing for discovery on non-Ethernet RJ-45
devices.
Who can help out?
thanks,
- Rick