Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[802.3af] FW: [Hubmib] I-D ACTION:draft-ietf-hubmib-power-ethernet-mib-00.txt



Please see the following announcement of the new Internet-Draft covering the
SNMP MIB for 802.3af. I required from Steve a presentation slot on this
issue in Portland.

Regards,

Dan


-----Original Message-----
From: Internet-Drafts@xxxxxxxx [mailto:Internet-Drafts@xxxxxxxx]
Sent: Tuesday, June 26, 2001 1:03 PM
To: IETF-Announce; @ietf.org@xxxxxxxxxxxxxxxxxx
Cc: hubmib@xxxxxxxx
Subject: [Hubmib] I-D ACTION:draft-ietf-hubmib-power-ethernet-mib-00.txt


A New Internet-Draft is available from the on-line Internet-Drafts
directories.
This draft is a work item of the Ethernet Interfaces and Hub MIB Working
Group of the IETF.

	Title		: Power Ethernet (DTE Power via MDI) MIB
	Author(s)	: A. Berger, D. Romascanu
	Filename	: draft-ietf-hubmib-power-ethernet-mib-00.txt
	Pages		: 24
	Date		: 25-Jun-01
	
This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in the Internet community.
The document proposes an extension to the Ethernet-like Interfaces
MIB [RFC2665] with a set of objects for managing a power Ethernet
Powered Device (PD) and/or Power Source Equipment (PSE).

A URL for this Internet-Draft is:
http://www.ietf.org/internet-drafts/draft-ietf-hubmib-power-ethernet-mib-00.
txt

Internet-Drafts are also available by anonymous FTP. Login with the username
"anonymous" and a password of your e-mail address. After logging in,
type "cd internet-drafts" and then
	"get draft-ietf-hubmib-power-ethernet-mib-00.txt".

A list of Internet-Drafts directories can be found in
http://www.ietf.org/shadow.html 
or ftp://ftp.ietf.org/ietf/1shadow-sites.txt


Internet-Drafts can also be obtained by e-mail.

Send a message to:
	mailserv@xxxxxxxxx
In the body type:
	"FILE /internet-drafts/draft-ietf-hubmib-power-ethernet-mib-00.txt".
	
NOTE:	The mail server at ietf.org can return the document in
	MIME-encoded form by using the "mpack" utility.  To use this
	feature, insert the command "ENCODING mime" before the "FILE"
	command.  To decode the response(s), you will need "munpack" or
	a MIME-compliant mail reader.  Different MIME-compliant mail readers
	exhibit different behavior, especially when dealing with
	"multipart" MIME messages (i.e. documents which have been split
	up into multiple messages), so check your local documentation on
	how to manipulate these messages.
		
		
Below is the data which will enable a MIME compliant mail reader
implementation to automatically retrieve the ASCII version of the
Internet-Draft.




ATT38493.txt

<ftp://internet-drafts/>
Transfer-mode: ftp.ietf.org