[LinkSec] Second Reminder - Working Group ballot of P802.1aa/D6.1 - 802.1X maintenance
This ballot is due to close on 17th July; to date, I have not received
ballot responses from the following voting members of 802.1:
Bob Moskowitz
Dan Romascanu
Dennis Volpano
Dolors Sala
Don O'Connor
Floyd Backes
Frank Reichstein
Hal Keen
Jim Burns
Karl Weber
Kazuo Takagi
Laura Bridge
Les Bell
Loren Larsen
Mick Seaman
Paul Congdon
Ran Ish-Shalom
Roger Lapuh
Steve Haddock
PLEASE find time in your busy schedules to give this document due
consideration and return your ballot response ASAP. This is an important
piece of work; your response can help to ensure that it will
progress.
Regards,
Tony
Original announcement follows...
---------------------------------------------------------------------
This Email is attached to an official 802.1 Task Group ballot form for
P802.1aa/D6.1. As this is a full Working Group ballot, only
802.1 voting members and liaisons are entitled to vote; however, any
non-voting participants in the activities of 802.1 may submit a
"Comment Only" ballot on the draft. In accordance with
established practice in 802, all comments received, whether from voters
or non-voters, are given due consideration during the ballot resolution
process.
The list of current voting members of 802.1 is as follows:
Floyd
Backes
Les
Bell
Paul
Bottorff
Laura
Bridge
Jim
Burns
Dirceu Cavendish
Paul
Congdon
Hesham Elbakoury
Norm W. Finn
David
Frattura
Gerard Goubert
Steve
Haddock
Ran
Ish-Shalom
Neil
Jarvis
Tony
Jeffree
Hal
Keen
Bill
Lane
Roger
Lapuh
Loren
Larsen
Dinesh Mohan
Bob
Moskowitz
Don
O'Connor
Glenn
Parsons
Frank
Reichstein
John
Roese
Allyn
Romanow
Dan
Romascanu
Dolors Sala
Mick
Seaman
Kazuo
Takagi
Michel Thorsen
Dennis Volpano
Karl
Weber
Michael D. Wright
It should be noted that the ongoing retention of 802.1 voting rights is
predicated on active participation in Working Group ballots. Active
participation is defined to be returning ballot forms in two out of the
last three Working Group ballots. The 802 Operating Rules allow
abstention for any cause other than "lack of technical
expertise" to be treated as though it were a failure to respond to a
ballot. 802.1 applies this rule.
The closing date of this ballot is:
17th July 2003
The PDF file of P802.1aa/D6.1 can be found at:
http://www.ieee802.org/1/files/private/aa-drafts/d6/802-1aa-d6-1.pdf
Username: p8021
Password: go_wildcats
If you have any difficulty downloading or reading this file, let me
know.
PLEASE NOTE that the volume of change in this document relative to D5 is
large, due to the re-description of the state machines in order to show
the distinction between the 802.1X protion and the "EAP Layer"
portion of the solution. In order to improve the clarity of the document,
all redline/strikout marking has been removed from D6.1, as the clutter
of deleted material was rendering the text difficult to read. However, a
version of D6.1 with redline/strikeout marking retained can be found in
the aa-drafts/d6 subdirectory of the website.
As is normal with our ballots, comments should specify not only what
problems have been identified with the text, but also what the commenter
proposes as a solution. In particular, Disapprove ballots MUST
be accompanied by Technical, Required and/or Editorial, Required
comments that clearly identify what the balloter requires to be done in
order to change his/her vote to Approve.
Any comments accompanying the ballot should be presented using the
following template:
NAME: <Your Name>
COMMENT TYPE: <TR (Technical, Required), T (Technical), ER
(Editorial,
Required), or E (Editorial)>
CLAUSE: <Clause/subclause number>
PAGE: <Page number>
LINE: <Line Number>
COMMENT START:
<Details of comment>
COMMENT END:
SUGGESTED CHANGES START:
<Details of suggested changes>
SUGGESTED CHANGES END:
RETURNING YOUR BALLOT FORM
==========================
Your ballot must be returned to:
stds-802-1@ieee.org
You are requested to use (exactly!) the appropriate Subject line
from
the following set when returning your ballot. Please send your
ballot
with the Subject line explicitly set, rather than using the Reply
function in your mailer.
P802.1aa/D6.1 Ballot - Approve
P802.1aa/D6.1 Ballot - Comments (with approve)
P802.1aa/D6.1 Ballot - Disapprove
P802.1aa/D6.1 Ballot - Comments (with abstain)
P802.1aa/D6.1 Ballot - Abstain
Regards,
Tony Jeffree
802.1 Chair.
******************************
Ballot form follows.....
******************************
------------------------------------------------------------------------
------------------------------------------------------------------------
NOTE: EMAIL ALL BALLOT RESPONSES ONLY TO: stds-802-1@ieee.org
------------------------------------------------------------------------
------------------------------------------------------------------------
P802.1aa/D6.1 EMAIL BALLOT
16th June 2003
TO: Tony Jeffree
Editor, P802.1aa/D6.1
SUBJECT: P802.1aa/D6.1 - 802.1X Maintenance
_____ 802.1 Voting Member
_____ I Approve (may attach non-binding comments below)
_____ I Disapprove (must attach binding comments below)
_____ I Abstain for the following reasons (may attach non-binding
comments below):
________ Lack of Time
________ Lack of Expertise
________ Other:
_______________________________________________
_____ Comment Only - Non-voter (comments attached below)
____________________________________________
(Name)
____________________________________________
(Telephone No.)
------------------------------------------------------------------------
INCLUDE COMMENTS BELOW THIS POINT
Regards,
Tony
Regards,
Tony