Re: [802SEC] +++Motion for P802.3-2005/Cor1 Conditional Approval
John,
Perhaps I am mistaken, but it's my impression that there is no ballot
underway yet.
As I understand the procedure, "The LMSC Chair, or an EC member
designated by the Chair (usually a Vice Chair), shall determine the
duration of the ballot, issue the ballot by e-mail and tally the
votes after the ballot is closed."
Under normal circumstances, once a motion is made and seconded, we
get a ballot announcement, such as
<http://ieee802.org/secmail/msg07768.html>, from the Chair (or from
someone else, with a designation from the Chair). The bare minimum
needed in such an announcement is a notification that the ballot is
underway, a statement of the motion, and a deadline.
I'm awaiting such an announcement before I cast a vote.
Roger
At 12:08 PM -0400 06/04/20, John Hawkins wrote:
>I approve
>j
>
>-----Original Message-----
>From: ***** IEEE 802 Executive Committee List *****
>[mailto:STDS-802-SEC@ieee.org] On Behalf Of Grow, Bob
>Sent: Wednesday, April 19, 2006 3:35 PM
>To: STDS-802-SEC@listserv.ieee.org
>Subject: [802SEC] +++Motion for P802.3-2005/Cor1 Conditional Approval
>
>Colleagues:
>
>Per agreement at the closing EC meeting in March, the following motion
>for five-day ballot has been moved and seconded.
>
>Grant conditional approval for submittal of P802.3-2005/Cor1 to RevCom
>per Clause 20 of the LMSC P&P.
>
>Moved: Bob Grow
>Seconded: Roger Marks
>
>
>
>BACKGROUND
>
>If the one negative balloter converts their vote to Approve with
>comment, no recirculation ballot need be conducted as no substantive
>changes have been made to the draft. If the negative balloter desires
>their comment and rebuttal to be reviewed by the ballot group a
>recirculation will be conducted on that one comment. I will report per
>the conditions in Clause 20 in either case.
>
>Ballot Open Date: 03/10/2006
>Ballot Close Date: 04/10/2006
>
>Response Rate
>This ballot has met the 75% returned ballot requirement.
>103 eligible people in this ballot group.
>79 affirmative votes
>1 negative votes with comments
>0 negative votes without comments
>2 abstention votes
>82 votes received = 80 % returned
>2 % abstention
>
>Approval Rate
>The 75% affirmation requirement is being met.
>79 affirmative votes
>1 negative votes with comments
>80 votes = 99% affirmative
>
>Comments
>5 comments received
>One omega symbol in the draft is displayed as an alpha character because
>of incorrect font. The identical text occurs three times in the draft,
>twice with the omega symbol (for ohms) and once with an alpha character.
>
>The editor will add spaces to change a few unit occurrences from "Vdc"
>to "V dc" per IEEE style
>Some front matter (not part of the approved draft/standard) changes
>recommended by the WG Chair were forwarded to the publication editor for
>consideration during publication preparation.
>At present, there remains one negative comment that was rejected by the
>ballot resolution group with rebuttal The D2.0 comment file with
>responses is posted at:
>http://www.ieee802.org/3/au/comments/D2.0/802.3au_D2p0.pdf.
>
>----------
>This email is sent from the 802 Executive Committee email reflector.
>This list is maintained by Listserv.
>
>----------
>This email is sent from the 802 Executive Committee email reflector.
>This list is maintained by Listserv.
----------
This email is sent from the 802 Executive Committee email reflector. This list is maintained by Listserv.