Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802SEC] P802-REVc Working Group ballot



Ben,

 

You can either submit comments directly in 802.1 (as all comments are accepted) or through another WGs comment collection.

 

Cheers,

Glenn.

 

From: ***** IEEE 802 Executive Committee List ***** <STDS-802-SEC@listserv.ieee.org> On Behalf Of Benjamin Rolfe
Sent: January 30, 2023 10:55 AM
To: STDS-802-SEC@LISTSERV.IEEE.ORG
Subject: Re: [802SEC] P802-REVc Working Group ballot

 

How do we, the 802 members who are not voters in 802.1 then submit comments?

I will have quite a few.

Ben

 


From: ***** IEEE 802 Executive Committee List ***** <STDS-802-SEC@listserv.ieee.org> on behalf of Glenn Parsons <00000f6f9e80d40c-dmarc-request@listserv.ieee.org>
Sent: Friday, January 27, 2023 4:30 PM
To: STDS-802-SEC@LISTSERV.IEEE.ORG <STDS-802-SEC@LISTSERV.IEEE.ORG>
Subject: Re: [802SEC] P802-REVc Working Group ballot

 

Ben,

 

This is being conducted under the current WG rules where the 802.1 members can vote and so can all EC members.  This email is to encourage review by all 802 WGs.  All comments will be considered.

 

Cheers,

Glenn.

 

From: Benjamin Rolfe <outlook_2CB8745B51AA14EB@outlook.com> On Behalf Of Benjamin Rolfe
Sent: January 27, 2023 3:12 PM
To: STDS-802-SEC@LISTSERV.IEEE.ORG; Glenn Parsons <glenn.parsons@ericsson.com>
Subject: Re: P802-REVc Working Group ballot

 

Question:   is 802.1 also limited to one vote for the entire working group?

Thanks

Ben


From: ***** IEEE 802 Executive Committee List ***** <STDS-802-SEC@listserv.ieee.org> on behalf of Glenn Parsons <00000f6f9e80d40c-dmarc-request@listserv.ieee.org>
Sent: Thursday, January 26, 2023 6:24 AM
To: STDS-802-SEC@LISTSERV.IEEE.ORG <STDS-802-SEC@LISTSERV.IEEE.ORG>
Subject: [802SEC] P802-REVc Working Group ballot

 

WG chairs,

 

With this message I would like to announce that I have initiated a working group ballot on P802-REVc ending on March 7th.   The intent is to have comment resolution meetings at the March plenary.

 

The announcement is attached and in the 802.1 email archive: 

https://www.ieee802.org/1/private/email2/msg34985.html

 

As confirmed during the November plenary, the working group ballot is following this process:

 

  1. The ballot is initiated in the 802.1 WG under the Maintenance TG and anyone is entitled to submit comments
    https://1.ieee802.org/maintenance/802-revc/
  2. The draft is in the 802.1 private area on grouper and privileges are set such that all 802 WG passwords grant access
    https://www.ieee802.org/1/files/private/802-REVc-drafts/d1/P802-REVc-d1-0.pdf
  3. Each WG chair is requested to conduct a comment collection using your WG process (for at least 30 days). The WG chair is not expected to change the commenter's name, review the comments collected or have WG consensus
  4. Each WG chair is an ex-officio voting member and is requested to cast a ballot with the collected comments. The WG chair decides how they determine the vote on this ballot
  5. Ballot comment disposition may include an informational summary of comments/votes per WG
  6. The 802.1 ballot is 40 days to give WG chairs sufficient time
  7. Each WG chair is requested to identify a representative to represent the submitted comments from that WG and/or the WG view dduring comment resolution.  
  8. Comment resolution will be conducted in dedicated meetings under the 802.1 Maintenance TG. Meeting announcements and discussion will happen on the Architecture list -- STDS-802-ARCH
    http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-ARCH&A=1

 

As a result I would ask the WG chairs to initiate comment collection on this draft in your WGs.

 

Please let me know if you have any questions.

 

Cheers,

Glenn.

--

Glenn Parsons

Chair, IEEE 802.1 WG

glenn.parsons@ericsson.com

+1-514-379-9037

 

 


To unsubscribe from the STDS-802-SEC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-SEC&A=1


To unsubscribe from the STDS-802-SEC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-SEC&A=1


To unsubscribe from the STDS-802-SEC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-SEC&A=1


To unsubscribe from the STDS-802-SEC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-SEC&A=1