Dear Robert,
thanks for providing the ANA values. I will include them in the next draft. Yes, please, reserve 154 for 320 MHz channel spacing which is of course planned in the future
also when using LC (IR).
Best regards - Volker
Von: Stacey, Robert [mailto:robert.stacey@xxxxxxxxx]
Gesendet: Mittwoch, 8. September 2021 02:19
An: Jungnickel, Volker <volker.jungnickel@xxxxxxxxxxxxxxxxx>
Cc: nikola.serafimovski@xxxxxxxxxxxx; Robert Stacey <rjstacey@xxxxxxxxx>; STDS-802-11-EDITORS@xxxxxxxxxxxxxxxxx
Betreff: RE: ANA values for TGbb
Hello Volker,
Sorry for the delay. Here are your allocations:
|
TransactionID |
Type |
Status |
User |
Group |
Resource |
Ref Doc |
Ref Subclause |
Ref Location |
Name |
Req Value |
Description |
Allocated Value |
|
1234 |
Allocate |
Pending |
Volker Jungnickel |
IEEE Std 802.11-2020 |
E.1 |
Table E-4 |
IR, 20 MHz spacing |
|||||
|
1236 |
Allocate |
Pending |
Volker Jungnickel |
IEEE Std 802.11-2020 |
E.1 |
Table E-4 |
IR, 40 MHz spacing |
|||||
|
1237 |
Allocate |
Pending |
Volker Jungnickel |
IEEE Std 802.11-2020 |
E.1 |
Table E-4 |
IR, 80 MHz spacing |
|||||
|
1238 |
Allocate |
Pending |
Volker Jungnickel |
IEEE Std 802.11-2020 |
E.1 |
Table E-4 |
IR, 160 MHz spacing |
I’m not sure what to do with “Reserved for near infrared” and have not allocated anything.
Presumably, you want room for contiguous expansion (maybe 320 MHz). To that end, I have allocated away from other allocations: 6 GHz goes to 136. 60 GHz has 180-187. And you have 150-153. Reserved values in between: 137-149,
153-179, 188-190.
BTW, I can mark a value as reserved for a specific future purpose. Should I do that for 154?
-Robert
From: Jungnickel, Volker <volker.jungnickel@xxxxxxxxxxxxxxxxx>
Sent: Monday, August 30, 2021 3:26 AM
To: Robert Stacey <rjstacey@xxxxxxxxx>; Stacey, Robert <robert.stacey@xxxxxxxxx>
Cc: nikola.serafimovski@xxxxxxxxxxxx
Subject: ANA values for TGbb
Dear Rober,
following a dicussion in TGbb, contained in CID 61 from Mark Hamilton in doc. 11-21/1050r3, could you, please, reserve 5 ANA values for TGbb? These ANA values are required for operation of LC with 20, 40, 80 160 and 320
MHz bandwidth (in the future). For your convenience, I include a snapshot of the related page 52 in TGbb D0.5.
Thanks and best regards – Volker
Prof. Dr. Volker Jungnickel
Metro-, Access and Inhouse Systems
Fraunhofer Heinrich Hertz Institut
Einsteinufer 37
10587 Berlin
Deutschland
Tel. 0162 255 2756
To unsubscribe from the STDS-802-11-EDITORS list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-EDITORS&A=1