Re: [STDS-802-11-TGAK] GLK Capabilities Element ID
Hi Mark,
While there were discussions of various criteria for assigning a
non-extended Element ID, including appearing in Beacons as one reason,
I don't think any of them achieved official status. We could try for
WG approval at the mid-week plenary in Vancouver and fall back to an
Element ID Extension if the WG does not approve...
Thanks,
Donald
===============================
Donald E. Eastlake 3rd +1-508-333-2270 (cell)
155 Beaver Street, Milford, MA 01757 USA
d3e3e3@xxxxxxxxx
On Tue, Feb 28, 2017 at 10:20 PM, Mark Hamilton
<mark.hamilton2152@xxxxxxxxx> wrote:
> Hmm. Can you remind me what the "rules" are, that suggest when a (non Extension) ID is appropriate? Since this parameter will be in every Beacon for any AP which supports GLK (even if mixed mode), this seems like a good candidate for the non-extension form. But, perhaps I'm not thinking of the rules correctly.
>
> Mark
>
> -----Original Message-----
> From: Donald Eastlake [mailto:d3e3e3@xxxxxxxxx]
> Sent: Tuesday, February 28, 2017 2:23 PM
> To: STDS-802-11-TGAK@xxxxxxxxxxxxxxxxx
> Subject: [STDS-802-11-TGAK] GLK Capabilities Element ID
>
> The P802.11ak draft current specifies use of an Element ID for the GLK Capabilities element but uses an Element ID Extension for the GLK-GCR Parameter Set element. Using an Element ID requires approval by the
> 802.11 WG which has been controversial in the past for some attempts to get approval.
>
> The MDR review of P802.11ak_Draft D3.0 recommends going to the Extension form for both of these, which can just be allocated by the ANA and does not require WG approval. Overall, I think this is a good idea and will put a motion to make this change on the TGak first session agenda in Vancouver.
>
> Thanks,
> Donald
> ===============================
> Donald E. Eastlake 3rd +1-508-333-2270 (cell)
> 155 Beaver Street, Milford, MA 01757 USA d3e3e3@xxxxxxxxx
>
> _______________________________________________________________________________
>
> IF YOU WISH to be Removed from this reflector, PLEASE DO NOT send your request to this CLOSED reflector. We use this valuable tool to communicate on the issues at hand.
>
> SELF SERVICE OPTION:
> Point your Browser to - http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGAK and then amend your subscription on the form provided. If you require removal from the reflector press the LEAVE button.
>
> Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html
> _______________________________________________________________________________
>
_______________________________________________________________________________
IF YOU WISH to be Removed from this reflector, PLEASE DO NOT send your request to this
CLOSED reflector. We use this valuable tool to communicate on the issues at hand.
SELF SERVICE OPTION:
Point your Browser to - http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGAK and
then amend your subscription on the form provided. If you require removal from the reflector
press the LEAVE button.
Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html
_______________________________________________________________________________