Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGAX] TG Draft D0.4



Thank you very much, Robert and Osama.

 

In the GI+LTF Size field of HE-SIG-A field for HE MU PPDU (Table 26-16),

 

Set to 0 to indicate a 1x HE-LTF and 0.8 μs GI

should be

Set to 0 for reserved

per PHY Motion #164 and CR Motion #30 from July 2016.

 

Regards,

Youhan

 

From: *** 802.11 TGax - HEW - High Efficiency WLAN *** [mailto:STDS-802-11-TGAX@xxxxxxxx] On Behalf Of Osama AboulMagd
Sent: Tuesday, August 30, 2016 4:55 AM
To: STDS-802-11-TGAX@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGAX] TG Draft D0.4

 

Hello All,

 

A new revision of the TG draft (D0.4) is now available in the member area.

 

Thanks to Robert for putting the draft together.

 

Regards;

Osama.

_______________________________________________________________________________

If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.

Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGAX and then press the LEAVE button.

Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________

_______________________________________________________________________________

If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.

Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGAX and then press the LEAVE button.

Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________