Re: [STDS-802-11-TGAX] Allowed puncturing patterns

["Yujian (Ross Yu)" <ross.yujian@xxxxxxxxxx>]

Thanks Mark. I don't think SP3 is necessary as it is clear that opt a enables no puncture in p80 but only secondary for case 7. 

--------------------------------------------------
regards
于健 Ross Yu
Sent from Great Huawei Mate 20X

发件人：Mark RISON <m.rison@xxxxxxxxxxx>

收件人：STDS-802-11-TGAX <STDS-802-11-TGAX@xxxxxxxx>

抄 送：Yujian (Ross Yu) <ross.yujian@xxxxxxxxxx>;Lili Hervieu <L.Hervieu@xxxxxxxxxxxxx>;Sigurd Schelstraete <sschelstraete@xxxxxxxxxxxxx>;youhank <youhank@xxxxxxxxxxxxxxxx>

时 间：2020-04-14 17:39:30

主 题：Re: Allowed puncturing patterns

> I am to run SP1. For SP2, that is not part of my CID. Maybe Lili or somebody else later can request a SP.

Lili has CID 24101 that covers SP2.  I don't mind who puts the SPs
forward; I'm happy to put them all forward.

In any case, it doesn't make sense to resolve these comments separately.
CIDs 24101, 24105, 24106, 24107, 24175 should all be resolved at the same time,
and I think they should be resolved by making the kinds of changes suggested
in http://www.ieee802.org/11/email/stds-802-11-tgax/msg01701.html (once
we've run the SPs to get the preferred direction).

I note that CID 24105 means we might need an additional SP:

SP3) For 160M/80+80M, should having no 20M subchannels in the primary 80 MHz channel punctured (only in the secondary 80 MHz channel) be allowed?

Thanks,

Mark

--

Mark RISON, Standards Architect, WLAN   English/Esperanto/Français
Samsung Cambridge Solution Centre       Tel: +44 1223  434600
Innovation Park, Cambridge CB4 0DS      Fax: +44 1223  434601
ROYAUME UNI                             WWW: http://www.samsung.com/uk

---

To unsubscribe from the STDS-802-11-TGAX list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGAX&A=1