Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBE] SP 3 in 11-20/396r5

Hi Ming,

 

By using RNR, a STA MLD can figure out all the collocated APs of an AP MLD through  MLD ID that has no AP in the reporting link. Without including the ML IE of such AP MLD, the Beacon overhead can be decreased. With RNR information (TBTT primary channel, Tx power restriction, MLD ID etc.),  the STA MLD can switch to the links of the AP MLD to do the active scanning or passive scanning.

 

Best Regards,

Liwen

 

From: Ganming (Ming) <ming.gan@xxxxxxxxxx>
Sent: Wednesday, July 15, 2020 6:07 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] SP 3 in 11-20/396r5

 

Hello Liwen

I do not think we need exclude that case you mentioned at this stage. What I am thinking of is that advertising colocated AP MLD in broadcast management frame is useful for non-AP MLD to find a better one with which it can do multilink setup, especially in Probe response frame.  This is like what we have done for 6GHz AP. What do u think about it?

Best wishes 
Ming Gan 




淦明 Ming
Mobile: +86-15889743667  
Email: ming.gan@xxxxxxxxxx

From: Liwen Chu<liwen.chu@xxxxxxx>

To: STDS-802-11-TGBE<STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx>

Subject: [STDS-802-11-TGBE] SP 3 in 11-20/396r5

Time: 2020-07-15 13:25:46

 

Hi Ming,

 

It seems you have some concerns about the SP3 in 11-20/396r5. Could you clarify why you think ML IE is needed in Beacon (broadcast Probe Response) for collocated AP MLD that has no affiliated AP in the reporting link?

 

Best Regards,

Liwen

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1