[STDS-802-11-TGBE] 答复: [STDS-802-11-TGBE] SP 3 in 11-20/396r5

Thread Links	Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

Hello Liwen

If it is Probe response, do you consider it?

Best wishes

Ming Gan

发件人: Liwen Chu [mailto:liwen.chu@xxxxxxx]
发送时间: 2020年7月17日 1:58
收件人: Ganming (Ming) <ming.gan@xxxxxxxxxx>; STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
主题: RE: [STDS-802-11-TGBE] SP 3 in 11-20/396r5

Hi Ming,

By using RNR, a STA MLD can figure out all the collocated APs of an AP MLD through MLD ID that has no AP in the reporting link. Without including the ML IE of such AP MLD, the Beacon overhead can be decreased. With RNR information (TBTT primary channel, Tx power restriction, MLD ID etc.), the STA MLD can switch to the links of the AP MLD to do the active scanning or passive scanning.

Best Regards,

Liwen

From: Ganming (Ming) <ming.gan@xxxxxxxxxx>
Sent: Wednesday, July 15, 2020 6:07 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] SP 3 in 11-20/396r5

Hello Liwen

I do not think we need exclude that case you mentioned at this stage. What I am thinking of is that advertising colocated AP MLD in broadcast management frame is useful for non-AP MLD to find a better one with which it can do multilink setup, especially in Probe response frame. This is like what we have done for 6GHz AP. What do u think about it?

Best wishes
Ming Gan

淦明 Ming
Mobile: +86-15889743667
Email: ming.gan@xxxxxxxxxx

From: Liwen Chu<liwen.chu@xxxxxxx>

To: STDS-802-11-TGBE<STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx>

Subject: [STDS-802-11-TGBE] SP 3 in 11-20/396r5

Time: 2020-07-15 13:25:46

Hi Ming,

It seems you have some concerns about the SP3 in 11-20/396r5. Could you clarify why you think ML IE is needed in Beacon (broadcast Probe Response) for collocated AP MLD that has no affiliated AP in the reporting link?

Best Regards,

Liwen

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1