Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBE] D0.1 Spec Text Preparation: Reminder for POCs

Hi Alfred, Liwen, Jeongki,

Can you add the following to the MAC agenda:

11-20-1255: pdt-mac-mlo-discovery-discovery-procedures-including-probing-and-rnr

11-20-1256: PDT-MAC-MLO-TID-mapping - link management - default mode and enablement

 

Thanks,

Laurent

 

 

From: Wook Bong Lee <wookbong.lee@xxxxxxxxxxx>
Sent: Tuesday, August 25, 2020 7:59 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] D0.1 Spec Text Preparation: Reminder for POCs

 

Hi Alfred, Sigurd and Tianyu,

 

Can you please add following three documents in PHY agenda?

11-20/1252r0, PDT-PHY-Frequency Tolerance, Wook Bong Lee (Samsung)

11-20/1253r1, PDT-PHY-Modulation Accuracy, Wook Bong Lee (Samsung)

11-20/1254r1, PDT-PHY-Receive specification: General and receiver minimum input sensitivity and channel rejection, Wook Bong Lee (Samsung)

 

Best regards,

Wook Bong Lee

 

From: Alfred Asterjadhi [mailto:asterjadhi@xxxxxxxxx]
Sent: Monday, August 24, 2020 4:16 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBE] D0.1 Spec Text Preparation: Reminder for POCs

 

Hello all,

 

This is a gentle reminder that when you have spec text ready for a particular subclause/topic then the POC should request the respective chairs (MAC/PHY/JOINT) to [add the contribution to the agenda] and run a SP for including the prepared spec text to TGbe D0.1. Quoting the particular bullet from the guidelines that deals with this aspect:

·         When the spec text for a particular subclause/topic is ready then the POC should request the respective chairs (MAC/PHY/JOINT) to run a SP for including the prepared spec text to the D0.1 of 11be.

o   The document that is planned to be ran should be posted in the server for at least 7 days prior to running the SP.

o   If the SP is approved then the TGbe editor will include the spec text to the draft, otherwise the spec text will not be included in its current form.

o   The deadline for completing this task is set for September 1st 2020 (EOD ET).

o   Note: Figures should be provided to the editor in visio format (monochromatic).

 

Please let me know if you have any questions and/or suggestions.

 

Best Regards,


Alfred

 

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1