[STDS-802-11-TGBE] 答复: [STDS-802-11-TGBE] D0.1 Spec Text Preparation: Re

Thread Links	Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

Hello Laurent

Please see my comments in the attached file.

Best wishes,

Ming Gan

发件人: Cariou, Laurent [mailto:laurent.cariou@xxxxxxxxx]
发送时间: 2020年8月26日 5:51
收件人: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
主题: Re: [STDS-802-11-TGBE] D0.1 Spec Text Preparation: Reminder for POCs

Hi Alfred, Liwen, Jeongki,

Can you add the following to the MAC agenda:

11-20-1255: pdt-mac-mlo-discovery-discovery-procedures-including-probing-and-rnr

11-20-1256: PDT-MAC-MLO-TID-mapping - link management - default mode and enablement

Thanks,

Laurent

From: Wook Bong Lee <wookbong.lee@xxxxxxxxxxx>
Sent: Tuesday, August 25, 2020 7:59 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] D0.1 Spec Text Preparation: Reminder for POCs

Hi Alfred, Sigurd and Tianyu,

Can you please add following three documents in PHY agenda?

11-20/1252r0, PDT-PHY-Frequency Tolerance, Wook Bong Lee (Samsung)

11-20/1253r1, PDT-PHY-Modulation Accuracy, Wook Bong Lee (Samsung)

11-20/1254r1, PDT-PHY-Receive specification: General and receiver minimum input sensitivity and channel rejection, Wook Bong Lee (Samsung)

Best regards,

Wook Bong Lee

From: Alfred Asterjadhi [mailto:asterjadhi@xxxxxxxxx]
Sent: Monday, August 24, 2020 4:16 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBE] D0.1 Spec Text Preparation: Reminder for POCs

Hello all,

This is a gentle reminder that when you have spec text ready for a particular subclause/topic then the POC should request the respective chairs (MAC/PHY/JOINT) to [add the contribution to the agenda] and run a SP for including the prepared spec text to TGbe D0.1. Quoting the particular bullet from the guidelines that deals with this aspect:

· When the spec text for a particular subclause/topic is ready then the POC should request the respective chairs (MAC/PHY/JOINT) to run a SP for including the prepared spec text to the D0.1 of 11be.

o The document that is planned to be ran should be posted in the server for at least 7 days prior to running the SP.

o If the SP is approved then the TGbe editor will include the spec text to the draft, otherwise the spec text will not be included in its current form.

o The deadline for completing this task is set for September 1^st 2020 (EOD ET).

o Note: Figures should be provided to the editor in visio format (monochromatic).

Please let me know if you have any questions and/or suggestions.

Best Regards,

Alfred

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

[STDS-802-11-TGBE] 答复: [STDS-802-11-TGBE] D0.1 Spec Text Preparation: Reminder for POCs