Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Hi Sameer, Thanks for the contribution. Some minor comments. The subclause number is 27.3.3. Should be changed to 34.x.x 27.3.3.1.2 Maximum number of spatial streams in an
HE MU PPDU A non-AP STA that supports UL MU-MIMO shall support transmitting an
HE TB PPDU using MU-MIMO where: HE should be EHT. Another clarification question, you mentioned: Single stream pilot is the only EHT-LTF mode for the transmission of an EHT TB PPDU where MU-MIMO is employed on an RU, both when the MU-MIMO RU does or does not span the entire PPDU BW. So your intention is to not support something similar as “HE masked HE-LTF sequence mode” for 11be? How about something like HE no pilot HE-LTF mode (1X HE-LTF without pilot)? regards 于健 Ross Yu Huawei Technologies 发件人: Sameer Vermani [mailto:svverman@xxxxxxxxxxxxxxxx]
Dear MU-MIMO TTT members and all, I have uploaded the initial draft for the PHY: MU-MIMO section to the server. Link is below. https://mentor.ieee.org/802.11/dcn/20/11-20-1160-00-00be-pdt-phy-mu-mimo.docx Please let me know if you have any feedback. Thank you. Regards, Sameer To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 |