Re: [STDS-802-11-TGBE] PDT-MAC-MLO Enhanced Multi-link Single-radio Oper

Thread Links	Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

Hi Minyoung,

Thanks for preparing the text.

Please find attached comments for r2 upload.

Best Regards

Sanghyun Kim

Sanghyun Kim, Ph.D
WILUS Inc.
5th Fl., 216 Hwangsaeul-ro Bundang-gu,
Seongnam-si Gyeonggi-do 13595, Korea
T +82 31 712 0523
www.wilusgroup.com

-----Original Message-----
From: "Minyoung Park"<mpark.ieee@xxxxxxxxx>
To: <STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx>;
Cc:
Sent: 2020-08-27 (목) 08:29:13 (GMT+09:00)
Subject: Re: [STDS-802-11-TGBE] PDT-MAC-MLO Enhanced Multi-link Single-radio Operation

Hello Yongho, Young Hoon, Yonggang, Sharan, Liwen,

I've updated PDT-MAC-MLO-enhanced-multi-link-single-radio-operation to r2 below:

https://mentor.ieee.org/802.11/dcn/20/11-20-1291-02-00be-pdt-mac-mlo-enhanced-multi-link-single-radio-operation.docx

Please review and let me know if you have any further comments.

Thanks,

Minyoung

On Wed, Aug 26, 2020 at 4:21 PM Minyoung Park <mpark.ieee@xxxxxxxxx> wrote:

Hi Yonggang,

Thanks for the comment. I see your point. I can clarify by saying the link switch delay is indicated in a management frame. I'll make the change in r2.

Thanks,
Minyoung

On Wed, Aug 26, 2020 at 12:41 PM <yfang@xxxxxxxxx> wrote:
Hi Minyoung ,

Thanks for the response.
For the response (I copied here) "The intention of the sentence is for a capability indication for the link switch delay. This can be informed from a non-AP MLD to an AP MLD upfront (one time) during capability exchange in the association phase or a mode change. Therefore, I don’t think the link switch delay needs to be included in the response frame of the initial control frame."

According to the context, "the non-AP MLD may indicate link swith delay" is after "The limitations for the initial Control frame shall be indicated by the non-AP MLD to the AP MLD ". This would cause confusion. I would suggest to clarify the "link switch delay" is indicated by the non-AP MLD in the capability exchange.

Thanks
Yonggang Fang
ZTE (TX)

Original Mail
Sender: MinyoungPark <mpark.ieee@xxxxxxxxx>
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx <STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx>;
Date: 2020/08/25 18:26
Subject: Re: [STDS-802-11-TGBE] PDT-MAC-MLO Enhanced Multi-link Single-radio Operation
Hi Yonggang ,

Sorry, the response was for you not Young Hoon .

Thanks,
Minyoung

On Tue, Aug 25, 2020 at 6:24 PM Minyoung Park <mpark.ieee@xxxxxxxxx> wrote:
Hello Young Hoon ,
Thanks for your comments. Please find my response in the attachment.

Regards,
Minyoung

On Tue, Aug 25, 2020 at 1:13 PM <yfang@xxxxxxxxx> wrote:
Hi Minyoung ,

Thanks for preparing the text. Some commnets in the attached file.

Best Regards

Yonggang Fang
ZTE (TX)

Original Mail
Sender: MinyoungPark <mpark.ieee@xxxxxxxxx>
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx <STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx>;
Date: 2020/08/24 21:15
Subject: [STDS-802-11-TGBE] PDT-MAC-MLO Enhanced Multi-link Single-radio Operation
Hello TTT members for Enhanced Multi-link Single-radio Operation,

Here is an initial draft text for enhanced multi-link single-radio operation:
https://mentor.ieee.org/802.11/dcn/20/11-20-1291-00-00be-pdt-mac-mlo-enhanced-multi-link-single-radio-operation.docx

Please review and let me know if you have any comments.

Thanks,
Minyoung
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1