Re: [STDS-802-11-TGBE] PDT-MAC-MLO Enhanced Multi-link Single-radio Oper

Thread Links	Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

On Wed, Aug 26, 2020 at 8:01 PM 김상현 <shk0787@xxxxxxxxx> wrote:

Hi Minyoung,

Thanks for preparing the text.
Please find attached comments for r2 upload.

Best Regards
Sanghyun Kim

Sanghyun Kim, Ph.D
WILUS Inc.
5th Fl., 216 Hwangsaeul-ro Bundang-gu,
Seongnam-si Gyeonggi-do 13595, Korea
T +82 31 712 0523
www.wilusgroup.com

-----Original Message-----
From: "Minyoung Park"<mpark.ieee@xxxxxxxxx>
To: <STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx>;
Cc:
Sent: 2020-08-27 (목) 08:29:13 (GMT+09:00)
Subject: Re: [STDS-802-11-TGBE] PDT-MAC-MLO Enhanced Multi-link Single-radio Operation

Hello Yongho, Young Hoon, Yonggang, Sharan, Liwen,

I've updated PDT-MAC-MLO-enhanced-multi-link-single-radio-operation to r2 below:
https://mentor.ieee.org/802.11/dcn/20/11-20-1291-02-00be-pdt-mac-mlo-enhanced-multi-link-single-radio-operation.docx

Please review and let me know if you have any further comments.

Thanks,
Minyoung

On Wed, Aug 26, 2020 at 4:21 PM Minyoung Park <mpark.ieee@xxxxxxxxx> wrote:
Hi Yonggang,

Thanks for the comment. I see your point. I can clarify by saying the link switch delay is indicated in a management frame. I'll make the change in r2.

Thanks,
Minyoung

On Wed, Aug 26, 2020 at 12:41 PM <yfang@xxxxxxxxx> wrote:
Hi Minyoung ,

Thanks for the response.
For the response (I copied here) "The intention of the sentence is for a capability indication for the link switch delay. This can be informed from a non-AP MLD to an AP MLD upfront (one time) during capability exchange in the association phase or a mode change. Therefore, I don’t think the link switch delay needs to be included in the response frame of the initial control frame."

According to the context, "the non-AP MLD may indicate link swith delay" is after "The limitations for the initial Control frame shall be indicated by the non-AP MLD to the AP MLD ". This would cause confusion. I would suggest to clarify the "link switch delay" is indicated by the non-AP MLD in the capability exchange.

Thanks
Yonggang Fang
ZTE (TX)

Original Mail
Sender: MinyoungPark <mpark.ieee@xxxxxxxxx>
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx <STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx>;
Date: 2020/08/25 18:26
Subject: Re: [STDS-802-11-TGBE] PDT-MAC-MLO Enhanced Multi-link Single-radio Operation
Hi Yonggang ,

Sorry, the response was for you not Young Hoon .

Thanks,
Minyoung

On Tue, Aug 25, 2020 at 6:24 PM Minyoung Park <mpark.ieee@xxxxxxxxx> wrote:
Hello Young Hoon ,
Thanks for your comments. Please find my response in the attachment.

Regards,
Minyoung

On Tue, Aug 25, 2020 at 1:13 PM <yfang@xxxxxxxxx> wrote:
Hi Minyoung ,

Thanks for preparing the text. Some commnets in the attached file.

Best Regards

Yonggang Fang
ZTE (TX)

Original Mail
Sender: MinyoungPark <mpark.ieee@xxxxxxxxx>
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx <STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx>;
Date: 2020/08/24 21:15
Subject: [STDS-802-11-TGBE] PDT-MAC-MLO Enhanced Multi-link Single-radio Operation
Hello TTT members for Enhanced Multi-link Single-radio Operation,

Here is an initial draft text for enhanced multi-link single-radio operation:
https://mentor.ieee.org/802.11/dcn/20/11-20-1291-00-00be-pdt-mac-mlo-enhanced-multi-link-single-radio-operation.docx

Please review and let me know if you have any comments.

Thanks,
Minyoung
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1