Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Thanks for very quick response.
Most of the comments have been resolved except the last one. Thank you again.
My intention of the last comments is as follow:
"During the frame exchange sequence, " =>"Until the end time of the frame exchange sequence + link switch delay of the EMLSR MLD"
Best Regard
Sanghyun Kim
Sanghyun Kim, Ph.D
-----Original Message-----
From: "Minyoung Park"<mpark.ieee@xxxxxxxxx>
To: <STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx>;
Cc:
Sent: 2020-08-27 (목) 12:57:14 (GMT+09:00)
Subject: Re: [STDS-802-11-TGBE] PDT-MAC-MLO Enhanced Multi-link Single-radio Operation
Hi Minyoung,
Thanks for preparing the text.
Please find attached comments for r2 upload.
Best Regards
Sanghyun Kim
Sanghyun Kim, Ph.D
WILUS Inc.
5th Fl., 216 Hwangsaeul-ro Bundang-gu,
Seongnam-si Gyeonggi-do 13595, Korea
T +82 31 712 0523
www.wilusgroup.com
-----Original Message-----
From: "Minyoung Park"<mpark.ieee@xxxxxxxxx>
To: <STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx>;
Cc:
Sent: 2020-08-27 (목) 08:29:13 (GMT+09:00)
Subject: Re: [STDS-802-11-TGBE] PDT-MAC-MLO Enhanced Multi-link Single-radio Operation
Hello Yongho, Young Hoon, Yonggang, Sharan, Liwen,I've updated PDT-MAC-MLO-enhanced-multi-link-single-radio-operation to r2 below:https://mentor.ieee.org/802.11/dcn/20/11-20-1291-02-00be-pdt-mac-mlo-enhanced-multi-link-single-radio-operation.docxPlease review and let me know if you have any further comments.Thanks,MinyoungOn Wed, Aug 26, 2020 at 4:21 PM Minyoung Park <mpark.ieee@xxxxxxxxx> wrote:Hi Yonggang,Thanks for the comment. I see your point. I can clarify by saying the link switch delay is indicated in a management frame. I'll make the change in r2.Thanks,MinyoungOn Wed, Aug 26, 2020 at 12:41 PM <yfang@xxxxxxxxx> wrote:Hi Minyoung ,
Thanks for the response.
For the response (I copied here) "The intention of the sentence is for a capability indication for the link switch delay. This can be informed from a non-AP MLD to an AP MLD upfront (one time) during capability exchange in the association phase or a mode change. Therefore, I don’t think the link switch delay needs to be included in the response frame of the initial control frame."
According to the context, "the non-AP MLD may indicate link swith delay" is after "The limitations for the initial Control frame shall be indicated by the non-AP MLD to the AP MLD ". This would cause confusion. I would suggest to clarify the "link switch delay" is indicated by the non-AP MLD in the capability exchange.
Thanks
Yonggang Fang
ZTE (TX)
Original MailSender: MinyoungPark <mpark.ieee@xxxxxxxxx>Date: 2020/08/25 18:26Subject: Re: [STDS-802-11-TGBE] PDT-MAC-MLO Enhanced Multi-link Single-radio OperationHi Yonggang ,Sorry, the response was for you not Young Hoon .Thanks,MinyoungOn Tue, Aug 25, 2020 at 6:24 PM Minyoung Park <mpark.ieee@xxxxxxxxx> wrote:Hello Young Hoon ,Thanks for your comments. Please find my response in the attachment.Regards,MinyoungOn Tue, Aug 25, 2020 at 1:13 PM <yfang@xxxxxxxxx> wrote:Hi Minyoung ,
Thanks for preparing the text. Some commnets in the attached file.
Best Regards
Yonggang Fang
ZTE (TX)
Original MailSender: MinyoungPark <mpark.ieee@xxxxxxxxx>Date: 2020/08/24 21:15Subject: [STDS-802-11-TGBE] PDT-MAC-MLO Enhanced Multi-link Single-radio OperationHello TTT members for Enhanced Multi-link Single-radio Operation,Here is an initial draft text for enhanced multi-link single-radio operation:https://mentor.ieee.org/802.11/dcn/20/11-20-1291-00-00be-pdt-mac-mlo-enhanced-multi-link-single-radio-operation.docxPlease review and let me know if you have any comments.Thanks,MinyoungTo unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1