#/******本邮件及其附件含有小米公司的保密信息，仅限于发送给上面地址中列出的个人或群组。禁止任何其他人以任何形式使用（包括但不限于全部或部分地泄露、复制、或散发）本邮件中的信息。如果您错收了本邮件，请您立即电话或邮件通知发件人并删除本邮件！ This e-mail and its attachments contain confidential information from XIAOMI, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!******/#Hi, Minyoung,
Thanks for your hard working, please find comments in the enclosed file.
Best Regards
Xiandong Dong
发件人: 김상현 <shk0787@xxxxxxxxx>
发送时间: 2020年8月27日 11:00
收件人: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
主题: [External Mail][营销邮件] Re: [STDS-802-11-TGBE] PDT-MAC-MLO Enhanced Multi-link Single-radio Operation
Hi Minyoung,
Thanks for preparing the text.
Please find attached comments for r2 upload.
Best Regards
Sanghyun Kim
Sanghyun Kim, Ph.D
WILUS Inc.
5th Fl., 216 Hwangsaeul-ro Bundang-gu,
Seongnam-si Gyeonggi-do 13595, Korea
T +82 31 712 0523
www.wilusgroup.com
-----Original Message-----
From: "Minyoung Park"<mpark.ieee@xxxxxxxxx>
To: <STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx>;
Cc:
Sent: 2020-08-27 (목) 08:29:13 (GMT+09:00)
Subject: Re: [STDS-802-11-TGBE] PDT-MAC-MLO Enhanced Multi-link Single-radio Operation
Hello Yongho, Young Hoon, Yonggang, Sharan, Liwen,
I've updated PDT-MAC-MLO-enhanced-multi-link-single-radio-operation to r2 below:
Please review and let me know if you have any further comments.
Thanks,
Minyoung
On Wed, Aug 26, 2020 at 4:21 PM Minyoung Park <mpark.ieee@xxxxxxxxx> wrote:
Hi Yonggang,
Thanks for the comment. I see your point. I can clarify by saying the link switch delay is indicated in a management frame. I'll make the change in r2.
Thanks,
Minyoung
On Wed, Aug 26, 2020 at 12:41 PM <yfang@xxxxxxxxx> wrote:
Hi Minyoung ,
Thanks for the response.
For the response (I copied here) "The intention of the sentence is for a capability indication for the link switch delay. This can be informed from a non-AP MLD to an AP MLD upfront (one time) during capability exchange in the association phase or a mode change. Therefore, I don’t think the link switch delay needs to be included in the response frame of the initial control frame."
According to the context, "the non-AP MLD may indicate link swith delay" is after "The limitations for the initial Control frame shall be indicated by the non-AP MLD to the AP MLD ". This would cause confusion. I would suggest to clarify the "link switch delay" is indicated by the non-AP MLD in the capability exchange.
Thanks
Yonggang Fang
ZTE (TX)
Original Mail
Sender: MinyoungPark <mpark.ieee@xxxxxxxxx>
Date: 2020/08/25 18:26
Subject: Re: [STDS-802-11-TGBE] PDT-MAC-MLO Enhanced Multi-link Single-radio Operation
Hi Yonggang ,
Sorry, the response was for you not Young Hoon .
Thanks,
Minyoung
On Tue, Aug 25, 2020 at 6:24 PM Minyoung Park <mpark.ieee@xxxxxxxxx> wrote:
Hello Young Hoon ,
Thanks for your comments. Please find my response in the attachment.
Regards,
Minyoung
On Tue, Aug 25, 2020 at 1:13 PM <yfang@xxxxxxxxx> wrote:
Hi Minyoung ,
Thanks for preparing the text. Some commnets in the attached file.
Best Regards
Yonggang Fang
ZTE (TX)
Original Mail
Sender: MinyoungPark <mpark.ieee@xxxxxxxxx>
Date: 2020/08/24 21:15
Subject: [STDS-802-11-TGBE] PDT-MAC-MLO Enhanced Multi-link Single-radio Operation
Hello TTT members for Enhanced Multi-link Single-radio Operation,
Here is an initial draft text for enhanced multi-link single-radio operation:
Please review and let me know if you have any comments.
Thanks,
Minyoung
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1