Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBE] PDT-MAC-MLO Power Save - Traffic Indication

Hi Minyoung, 

Applying this change, 
or for a non-AP MLD that the AP MLD with which the AP is affiliated is prepared to deliver at the time the Beacon frame is transmitted.. Bit number N indicates the status of buffered, individually addressed MSDUs/MMPDUs for the STA or the non-AP MLD whose AID is N, or group addressed MSDUs/MMPDUs for the STAs whose group AID is N.(11ah) It is set as(#4678) follows:

It seems that the following paragraphs (maybe more) also have to be modified.   
— If the STA or the non-AP MLD is not using APSD, and any individually addressed MSDUs/MMPDUs for that STA or that non-AP MLD are buffered and the AP, the AP MLD or the mesh STA is prepared to deliver them, then bit number N in the traffic indication virtual bitmap is 1.
— If the STA or the non-AP MLD is using APSD, and any individually addressed MSDUs/MMPDUs for that STA or that non-AP MLD are buffered in at least one nondelivery-enabled AC (if there exists at least one nondelivery-enabled AC), then bit number N in the traffic indication virtual bitmap is 1.
— If the STA or the non-AP MLD is using APSD, all ACs are delivery-enabled, and any individually addressed MSDUs/MMPDUs for that STA or that non-AP MLD are buffered in any AC, then bit number N in the traffic indication virtual bitmap is 1.
— Otherwise, bit number N in the traffic indication virtual bitmap is 0.

...
Each bit starting from bit 2n in the traffic indication virtual bitmap corresponds to individually addressed traffic buffered for a specific STA or a specific non-AP MLD within any BSS corresponding to a transmitted or nontransmitted BSSID at the time the Beacon frame is transmitted. The correspondence is based on the AID of the STA or the non-AP MLD.

it seems that it is good to describe only the updated part in clause 33.3.6.1 based on the editor guideline.  

Regarding the following: 
An AP of an AP MLD may transmit on a link a frame that carries an indication of buffered data for transmission on other enabled link(s). The format of the indication is TBD.
An AP MLD may recommend a non-AP MLD to use one or more enabled links. The AP’s indication may be carried in a broadcast or a unicast frame. The format of the indication is TBD.
I think this is needed only if the TID-to-link mapping negotiation is applied [11-19/1544r5, 11-20/1904]. But, because the R1/R2 for the TID-to-link mapping negotiation is holding, I suggest removing this sentence for now. I will try to resolve the R1/R2 decision by next week. 

Thanks, 
Yongho 

2020년 8월 28일 (금) 오전 10:37, Minyoung Park <mpark.ieee@xxxxxxxxx>님이 작성:
Hello Greg and all,

I've uploaded r2 based on the feedback I received so far:
https://mentor.ieee.org/802.11/dcn/20/11-20-1292-02-00be-pdt-mac-mlo-power-save-traffic-indication.docx

Please review and let me know if you have any further comments.

Thanks,
Minyoung


On Thu, Aug 27, 2020 at 10:55 PM Greg Geonjung Ko <greg.ko@xxxxxxxxxxxxxx> wrote:
Hello Minyoung,
Thanks for preparing the text.

Here is a comment on the last sentence.
“all links” seems to have an ambiguity. It may be interpreted as links set by “the” multi-link setup for the non-AP MLD.
Please clarify “all links” to include not only links set by the multi-link setup, but all the other links where the AP MLD operates.
For example, by adding "that the AP MLD operates on", "and the same AID is not assigned to another STA or MLD", or something similar.

Thank you.

Regards,
Greg

On Aug 26, 2020, at 9:13 AM, Minyoung Park <mpark.ieee@xxxxxxxxx> wrote:

Hello TTT members for Power Save - Traffic Indication,  

The document is revised to r1:
https://mentor.ieee.org/802.11/dcn/20/11-20-1292-01-00be-pdt-mac-mlo-power-save-traffic-indication.docx

Please review and let me know if you have any comments.

Thanks,
Minyoung


On Mon, Aug 24, 2020 at 9:48 PM Minyoung Park <mpark.ieee@xxxxxxxxx> wrote:
Hello TTT members for Power Save - Traffic Indication,

Here is an initial draft text for the power save - traffic indication section: 
https://mentor.ieee.org/802.11/dcn/20/11-20-1292-00-00be-pdt-mac-mlo-power-save-traffic-indication.docx

Please review and let me know if you have any comments.

Thanks,
Minyoung

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1


To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1