Hi, Edward and Wook Bong.
I checked this out and found out there are content conflict as below.
What I thought was EHT Modulation and coding schemes correspond to 27.3.7 (HE modulation and coding schemes (HE-MCSs))
And Parameters for EHT-MCSs correspond to 27.5 (Parameters for HE-MCSs)
But Rethna’s document includes both together.
And if Rethna deletes all the tables and make a reference instead to the subclause in DCN 1290, then there would be no conflicts.
To Rethna,
Do you have any suggestions?
Regards,
Yujin
From: Wook Bong Lee <wookbong.lee@xxxxxxxxxxx>
Sent: Thursday, August 27, 2020 3:40 PM
To: Edward Au <edward.ks.au@xxxxxxxxx>; STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx; Yujin Noh <yujin.noh@xxxxxxxxxxxx>; rethnakaran.pulikkoonattu@xxxxxxxxxxxx
Cc: Ruchen Duan <r.duan@xxxxxxxxxxx>
Subject: RE: [STDS-802-11-TGBE] PDT-PHY-Parameters for EHT-MCSs
Hi Yujin and Rethna,
I noticed that there are two PDTs on EHT-MCS.
24-Aug-2020 ET
2020
1290
0
TGbe
PDT-PHY-Parameters-for-EHT-MCSs
Yujin Noh (Newracom)
27-Aug-2020 17:12:20 ET
27-Aug-2020 ET
2020
1338
1
TGbe
PDT-PHY-EHT Modulation and Coding (EHT-MCSs)
Rethna Pulikkoonattu (Broadcom)
27-Aug-2020 16:37:34 ET
Both of them contain table…
Can you guys clarify this?
Also, I have several comments on 11-20/1338.
There are many texts which assume we have EHT SU and EHT ER SU. But we don’t have those PPDU format.
Moreover, I don’t recall agreement on MCS levels for EHT-SIG.
I have few more, but will wait for above discussion first.
Thanks.
Best regards,
Wook Bong Lee
From: Edward Au [mailto:edward.ks.au@xxxxxxxxx]
Sent: Thursday, August 27, 2020 3:18 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT-PHY-Parameters for EHT-MCSs
Hello Yujin,
Thanks for this. I understand that there are similar but not exact contents in 20/1338r1 that contains more than 100 tables. May I know if it is possible to merge these two PDTs together?
Regards,Edward
On Thu, Aug 27, 2020 at 5:21 PM Yujin Noh <yujin.noh@xxxxxxxxxxxx> wrote:
Hi TTT and all,
I just uploaded draft text proposal for Parameters for EHT-MCSs as below
11-20/1290r0 PDT-PHY-Parameters-for-EHT-MCSs
Please let me know if you have any comments.
Regards,
Yujin
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
--
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
