Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Dear Sanghyun, Thank you for the comment. As for SFD, a link is considered enabled as long as at least one TID is mapped to the link. So by definition “any link that has the TID mapped to it” is an enabled link, as such I do not think we need to add “enabled”
here. Let me know if you have further thoughts on this.
A link, that is setup as part of a multi-link setup, is defined as Enabled if that link can be used for frame exchange and
at least one TID is mapped to that link.
NOTE – Frame exchange on a link is subject to the power state of the corresponding non-AP STA.
[Motion 105, [21] and
[118]] Regards, Rojan From:
김상현 <shk0787@xxxxxxxxx> Hi Rojan Thanks for sharing the draft. Just a small comment, in my understanding "any available link" in the motion text refers to links that have TID mapped and enabled. Could you change "any link that has the TID mapped to it" to "any
enabled link that as the TID mapped to it" (very last part of the sentence) Best Regard, Sanghyun Kim Sanghyun Kim, Ph.D
-----Original Message----- Dear MLO Retransmissions TTT members and all, I have posted the D.01 Spec text for MLO Retransmissions: https://mentor.ieee.org/802.11/dcn/20/11-20-1261-00-00be-pdt-mac-mlo-retransmissions.docx Please help to review and let me know if there is anything. Thanks! Regards, Rojan To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 |