Re: [STDS-802-11-TGBE] pdt-mac-mlo-multi-link-channel-access-capability-

Thread Links	Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

Hi Yunbo,

Thanks.

Some comments attached

Thanks

Laurent

From: Sharan Naribole <n.sharan@xxxxxxxxxxx>
Sent: Monday, August 31, 2020 2:11 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] pdt-mac-mlo-multi-link-channel-access-capability-signaling

Hi Yunbo,

Thanks for preparing document! The below motion is related to STR capability signaling after multi-link setup. Currently, it is classified under MLO-Multi-link setup: Procedure. I think Multi-link channel access: Capability Signaling is more apt. Could you add this to your doc? I can mention this in upcoming call.

802.11be supports that a non-AP MLD may update its ability to perform simultaneous transmission and reception on a pair of setup links after multi-link setup.

This update for any pair of setup links can be announced by non-AP MLD on any enabled link.

NOTE – Specific signaling for update indication is TBD.

NOTE – Limitations on dynamic updating is TBD.

[Motion 112, #SP4, [13] and [101]]

Thanks,

Sharan

From: Liyunbo [mailto:liyunbo@xxxxxxxxxx]
Sent: Sunday, August 30, 2020 6:57 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBE] pdt-mac-mlo-multi-link-channel-access-capability-signaling

Hello, MLO Multi-Link Channel Access: Capability Signaling TTT members and those interested in this topic

I uploaded a preliminary draft on MLO Multi-Link Channel Access: Capability Signaling to the mentor.

https://mentor.ieee.org/802.11/dcn/20/11-20-1320-01-00be-pdt-mac-mlo-multi-link-channel-access-capability-signaling.docx

Please let me know your opinions.

Regards

Yunbo Li

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1