Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[STDS-802-11-TGBE] 答复: [STDS-802-11-TGBE] pdt-mac-mlo-multi-link-channel-access-capability-signaling

Hi All,

 

Motion 112 (#SP4) is added in 11-20/1320r2. Please further check.

https://mentor.ieee.org/802.11/dcn/20/11-20-1320-02-00be-pdt-mac-mlo-multi-link-channel-access-capability-signaling.docx

 

Hi Laurent and Dibakar,

 

Thanks for the comments. I accept all the editorial changes. But for the comments about single radio MLD, I didn’t add it in this version. The reason is single radio MLD is not mentioned in any motion in this document, the comments related to the details of the signaling design. So I prefer to modify or add them after the details of signaling passed the motion. Please check whether it is OK for you.

 

 

Regards,

Yunbo

 

发件人: Cariou, Laurent [mailto:laurent.cariou@xxxxxxxxx]
发送时间: 2020年9月1日 5:32
收件人: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
主题: Re: [STDS-802-11-TGBE] pdt-mac-mlo-multi-link-channel-access-capability-signaling

 

Hi Yunbo,

Thanks.

Some comments attached

Thanks

Laurent

 

From: Sharan Naribole <n.sharan@xxxxxxxxxxx>
Sent: Monday, August 31, 2020 2:11 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] pdt-mac-mlo-multi-link-channel-access-capability-signaling

 

 

Hi Yunbo,

 

Thanks for preparing document! The below motion is related to STR capability signaling after multi-link setup. Currently, it is classified under MLO-Multi-link setup: Procedure. I think Multi-link channel access: Capability Signaling is more apt. Could you add this to your doc? I can mention this in upcoming call.

 

802.11be supports that a non-AP MLD may update its ability to perform simultaneous transmission and reception on a pair of setup links after multi-link setup.

  • This update for any pair of setup links can be announced by non-AP MLD on any enabled link.

NOTE – Specific signaling for update indication is TBD.

NOTE – Limitations on dynamic updating is TBD.

[Motion 112, #SP4, [13] and [101]]

 

Thanks,

Sharan

 

From: Liyunbo [mailto:liyunbo@xxxxxxxxxx]
Sent: Sunday, August 30, 2020 6:57 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBE] pdt-mac-mlo-multi-link-channel-access-capability-signaling

 

Hello, MLO Multi-Link Channel Access: Capability Signaling TTT members and those interested in this topic

 

I uploaded a preliminary draft on MLO Multi-Link Channel Access: Capability Signaling to the mentor.

 

https://mentor.ieee.org/802.11/dcn/20/11-20-1320-01-00be-pdt-mac-mlo-multi-link-channel-access-capability-signaling.docx

 

 

Please let me know your opinions.

 

 

Regards

Yunbo Li

 

 

 

 

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1