Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Hi Dibakar Made a mistake. I remove {2,3} Thanks Best Regards Insun From: 장인선 [mailto:insun.jang@xxxxxxx] Hi Dibakar Thanks very much for your comments For your example, STR link set would be {1,3}, BTW, I think you want to signal the capability for “a pair of links”, is it correct? In fact, I’d like to align with the capability signaling to being discussed since the decision of STR/non-STR depends on link-related parameters. If that is really being for a pair of links, I can change the text below as the following example without the definition. “An STA that is affiliated with an MLD and that is operating on a link in a pair of links capable STR may contend…” Do you have any comments on that? Or other suggestions? Thanks Best Regards Insun From: Das, Dibakar [mailto:dibakar.das@xxxxxxxxx] Hi Insun, Thanks for preparing the document. Is there a reason to define STR link set ? As an example, consider the case where there are three links -1,2 & 3 such that linkpairs (1 & 3) are STR but links (2 & 3), and (1,2) are non-STR. What is the link set here and how does the following text work in this example: “An STA that is affiliated with an MLD and that is operating on a link that is a part of an STR link set may contend…” ? Regards, Dibakar From: 장인선 <insun.jang@xxxxxxx> Dear all TTT members for ML channel access: General-STR Thanks very much for comments. I have resolved the comments and uploaded an updated version (r3) to Mentor. Main changes 1) Added the definition of STR link set and based on this, updated some texts 2) Clarified multi-link channel access to emphasize "independent" Please let me know if you have any comments/questions on the updated text Thanks Best Regards Insun ---------- Original Message ----------
Dear all TTT members for ML channel access: General-STR Thanks very much for comments I have uploaded an updated version (r1) based on the comments by some members Please let me know if you have any comments/questions on the updated text Thanks Best Regards Insun From: 장인선 [mailto:insun.jang@xxxxxxx] Hi Yonggang Thanks a lot for your comments Please see my response in the attached document (This is the e-mail to resend. It seems that my responses wasn’t transferred yesterday) Thanks Best Regards Insun From: yfang@xxxxxxxxx [mailto:yfang@xxxxxxxxx] Hi Insun and Laurent, Thanks for preparing the text and update. Some comments are in the attached file. Best Regards Yonggang Fang ZTE (TX) Original Mail Sender: 장인선 <insun.jang@xxxxxxx> Date: 2020/08/25 23:08 Subject: Re: [STDS-802-11-TGBE] PDT-MAC-MLO-multi-link-channel-access-general-str Hi Laurent Thanks very much for your comments Please see my responses in the attached document Please note that the updated texts in the attached document are for responses. I'll elaborate them in r1 based on the texts and another feedback Thanks Best Regards Insun ---------- Original Message ---------- Quick comment attached Thanks Laurent From: 장인선 <insun.jang@xxxxxxx> Dear all TTT members for ML channel access: General-STR I have uploaded an initial version of proposed text for ML channel access: General-STR Please let me know if you have any comments/questions on the proposed text Thanks Best Regards Insun To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 |