Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBE] PDT-PHY- Receive specification: General and receiver minimum input sensitivity and channel rejection

Hi Edward,

 

As I see many others are including 80+80/160+160 MHz, I just can add 80+80/160+160 MHz case as well. All marked with highlight so that later if we decide to remove, we can remove it.

 

Thanks.

Best regards,

Wook Bong Lee

 

From: Edward Au [mailto:edward.ks.au@xxxxxxxxx]
Sent: Thursday, September 10, 2020 9:42 AM
To: Wook Bong Lee <wookbong.lee@xxxxxxxxxxx>
Cc: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT-PHY- Receive specification: General and receiver minimum input sensitivity and channel rejection

 

Hello Wook Bong,

 

Thanks - I overlook your abstract :)

May I know if you can add a note after the table saying that the values of 80+80/160+160 MHz will be defined at a later stage?   In this way, I will convert it as an Editor's note when I roll in your contribution in D0.1.

 

Thanks and Regards,
Edward

 

On Thu, Sep 10, 2020 at 12:39 PM Wook Bong Lee <wookbong.lee@xxxxxxxxxxx> wrote:

Hi Edward,

 

Thanks for comment.

As I mentioned in the abstract of the contribution, I didn’t include 80+80/160+160 MHz yet as there is some related discussion in PHY adhoc.

 

At this moment, maybe I can put those in PDTs with TBD.

I will update all PDTs and upload it soon.

 

Best regards,

Wook Bong Lee

 

From: Edward Au [mailto:edward.ks.au@xxxxxxxxx]
Sent: Thursday, September 10, 2020 8:58 AM
To: Wook Bong Lee <wookbong.lee@xxxxxxxxxxx>
Cc: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT-PHY- Receive specification: General and receiver minimum input sensitivity and channel rejection

 

Hello Wook Bong ,

 

In Table xx-y1, you have an entry "Minimum sensitivity (160 MHz PPDU) (dBm)".   In clause 21 and clause 27, this entry is "Minimum sensitivity (160 MHz or 80+80 MHz PPDU) (dBm)".  I may miss the discussion in PHY ad-hoc but may I know whether we shall update this entry in your table to 160 MHz or 80 + 80 MHz too?  A similar quarion for your 320 MHz entry too.

 

Thanks and Regards,
Edward

 

On Thu, Aug 27, 2020 at 4:49 PM Wook Bong Lee <wookbong.lee@xxxxxxxxxxx> wrote:

Hi Yujin,

 

Thanks for comment.

I already marked coding rate of 4K QAM in yellow. (Yellow highlighted texts are TBD in my draft as described in the abstract.)

During conference call, we can put 3/4(TBD) 5/6 (TBD) or [3/4] [5/6] if necessary.

 

Best regards,

Wook Bong Lee

 

From: Yujin Noh [mailto:yujin.noh@xxxxxxxxxxxx]
Sent: Thursday, August 27, 2020 1:39 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT-PHY- Receive specification: General and receiver minimum input sensitivity and channel rejection

 

Hi Wookbong.

 

Thank you for sharing the document.

Please find the comment in attached.

 

Regards,

Yujin

 

From: Youhan Kim <youhank@xxxxxxxxxxxxxxxx>
Sent: Tuesday, August 25, 2020 5:38 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT-PHY- Receive specification: General and receiver minimum input sensitivity and channel rejection

 

Sure, thanks Wookbong.

Regards,

Youhan

 

From: Wook Bong Lee <wookbong.lee@xxxxxxxxxxx>
Sent: Tuesday, August 25, 2020 5:37 PM
To: Youhan Kim <youhank@xxxxxxxxxxxxxxxx>; STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: RE: [STDS-802-11-TGBE] PDT-PHY- Receive specification: General and receiver minimum input sensitivity and channel rejection

 

CAUTION: This email originated from outside of the organization.

Thanks Youhan.

 

Looks good.

I somehow missed those two sections. Thanks for writing those sections.

Can I add you as an author?

 

Will upload revision soon.

 

Best regards,

Wook Bong Lee

 

From: Youhan Kim [mailto:youhank@xxxxxxxxxxxxxxxx]
Sent: Tuesday, August 25, 2020 5:04 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT-PHY- Receive specification: General and receiver minimum input sensitivity and channel rejection

 

Thanks Wookbong for the nice work.

Please see attached for my feedback.

Regards.

Youhan

 

From: Wook Bong Lee <wookbong.lee@xxxxxxxxxxx>
Sent: Thursday, August 20, 2020 7:32 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT-PHY- Receive specification: General and receiver minimum input sensitivity and channel rejection

 

CAUTION: This email originated from outside of the organization.

Hi all,

 

I just uploaded draft text proposal for receive specification: General and receiver minimum input sensitivity and channel rejection.

11-20/1254r0 PDT-PHY-Receive specification: General and receiver minimum input sensitivity and channel rejection

 

Best regards,

Wook Bong Lee

 

From: Wook Bong Lee
Sent: Friday, July 31, 2020 5:33 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: PDT-PHY- Receive specification: General and receiver minimum input sensitivity and channel rejection

 

Hello all,

This is for PHY- Receive specification: General and receiver minimum input sensitivity and channel rejection.

As you can find in 11ax spec, we have following three sections for this.

  • 34.3.20 – Receiver specification
    • 34.3.20.1 General
    • 34..3.20.2 Receiver minimum input sensitivity
    •  34.3.20.3 Adjacent channel rejection

 

There is no motion for these sections.

 

It can be similar to 11ax.

I can volunteer for these sections.

 

If you have any suggestion, please let us know.

Best regards,

Wook Bong Lee


 

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1