Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBE] PDT-PHY-Support of large bandwidth



Hi Wook Bang:

 

I have revised and uploaded the PDT to r4 based on your comment.

 

Thanks,

Yan.  

 

From: Wook Bong Lee [mailto:wookbong.lee@xxxxxxxxxxx]
Sent: Monday, September 14, 2020 5:58 PM
To: Yan Xin <Yan.Xin@xxxxxxxxxx>; STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: RE: [STDS-802-11-TGBE] PDT-PHY-Support of large bandwidth

 

Hi Yan,

 

Thanks for response.

My question was on non-AP STA to support MRUs.

The text you captured seems for AP to allocate MRUs not non-AP STA to support.

 

Best regards,

Wook Bong Lee

 

From: Yan Xin [mailto:Yan.Xin@xxxxxxxxxx]
Sent: Monday, September 14, 2020 2:10 PM
To: Wook Bong Lee <wookbong.lee@xxxxxxxxxxx>; STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: RE: [STDS-802-11-TGBE] PDT-PHY-Support of large bandwidth

 

Hi Wook Bong:

 

Thanks for sharing your comment.

 

In 1315r2, support of MRU has been described in the first and fifth paragraphs for 80 MHz and 160 MHz operating non-AP EHT STA, respectively, e.g., in the first paragraph,  

“An EHT AP shall be able to allocate a single 996-tone RU (see 34.3.2.2 (Subcarriers and resource allocation for wideband) or multiple RUs (see 34.3.3 Subcarriers and Resource Allocation for Multiple RUs) on one 80 MHz frequency segment within the BSS bandwidth in a 160 MHz, 80+80 MHz, 320 MHz or 160+160 MHz EHT MU or EHT TB PPDU to an 80 MHz operating non-AP EHT STA.”

 

Hope this is ok to you.

 

Best regards,

Yan.

 

From: Wook Bong Lee [mailto:wookbong.lee@xxxxxxxxxxx]
Sent: Monday, September 14, 2020 4:25 PM
To: Yan Xin <Yan.Xin@xxxxxxxxxx>; STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: RE: [STDS-802-11-TGBE] PDT-PHY-Support of large bandwidth

 

Hi Yan,

 

Thanks for your effort.

I have one comment.

MRU is missing in (e.g.) below.

An 80 MHz operating non-AP EHT STA shall support tone mapping of 26-tone RU, 52-tone RU, 106-tone RU, 242-tone RU, 484-tone RU and 996-tone RU for an 80 MHz EHT PPDU (see Table xxx (Data and pilot subcarrier indices for RUs in an 80 MHz EHT PPDU)) when participating in 160 MHz, 80+80 MHz, 320 MHz or 160+160 MHz EHT DL and UL OFDMA transmissions.

 

Maybe you can add MRUs as well?

 

Best regards,

Wook Bong Lee

 

From: Yan Xin [mailto:Yan.Xin@xxxxxxxxxx]
Sent: Monday, September 14, 2020 7:56 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT-PHY-Support of large bandwidth

 

Hi Jinsoo, hi all:

 

Please find the revised draft PDT for support for large bandwidth by considering Jinsoo’s comments. Please let me know if you have further comments/suggestions.

 

Best regards,

Yan.

 

From: Jinsoo Choi [mailto:js.choi@xxxxxxx]
Sent: Sunday, September 13, 2020 11:24 PM
To: Yan Xin <Yan.Xin@xxxxxxxxxx>; STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: RE: [STDS-802-11-TGBE] PDT-PHY-Support of large bandwidth

 

Hi Yan,

 

Thank you for the work on revision. Please see a few comments as attached.

 

Best regards,

Jinsoo

 

From: Yan Xin [mailto:Yan.Xin@xxxxxxxxxx]
Sent: Monday, September 14, 2020 7:39 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBE] PDT-PHY-Support of large bandwidth

 

Hi Wook Bong, Bin, Youhan, TTT members, hi all:

 

A revision of 1315r1 was uploaded to the server. Please review it and let me know your comments/suggestions.

https://mentor.ieee.org/802.11/dcn/20/11-20-1315-02-00be-draft-text-for-support-for-large-bandwidth.docx

 

Thanks,

Yan.

 


To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1


To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1


To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1