Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Hi Ming, Please address the case when the AP is a non-transmitted BSSID. We have a clear requirement for an AP to include “Change sequence” for the AP of the same MLD. When the AP is not part of a multi-BSSID or when the AP is a transmitted BSSID, you covered that. When the AP is a non-transmitted BSSID, obviously it is the transmitted BSSID that has to include the “change sequence” for the AP of the same MLD as the non-transmitted BSSID.
This last part is missing in your text and has to be there to make this complete. Thanks Laurent From: Ganming (Ming) <ming.gan@xxxxxxxxxx>
Hi Abhi Baseline may be correct depending on how you interpret this sentence. If there is only critical update among a few beacon frames, could
we have beacon frames in this case? Anyway this unclear description could be avoided now because off adding Probe Response frame (now it is Beacon and Probe Reponses frames). Regarding MBSSID, let us discuss it later. Best wishes Ming Gan 发件人:
Abhishek Patil [mailto:appatil@xxxxxxxxxxxxxxxx]
Hi Ming, I believe there is an error in baseline spec for the reference you cited: The increment to a change sequence value should occur at the next beacon so it should be in a single frame (Beacon frame
not Beacon frame(s)). The subsequent Beacon and Probe Response frames would carry the new (incremented) value for change sequence.
Per SP #191/#77, RNR in Probe Response frame would also include a field for carrying the most recent value of change sequence. This text is not covered in your doc. Regarding the missing text on MBSSID, I prefer that we address it now. But if you have a strong opinion, could you please add a TBD so that we can address it in D0.1? Regards, Abhi From: Ganming (Ming) <ming.gan@xxxxxxxxxx>
CAUTION:
This email originated from outside of the organization. Abhi, please see the attached response.
发件人:
Abhishek Patil [mailto:appatil@xxxxxxxxxxxxxxxx]
Hi Ming, This doc is not yet ready for SP. It is missing some of the changes we discussed during the previous IEEE call. It also needs to cover the changes in RNR IE 9.4.2.170.2
clause. Could you please take a look at my comments embedded in the attached file? Regards, From: Cariou, Laurent <laurent.cariou@xxxxxxxxx>
CAUTION:
This email originated from outside of the organization. Thanks Ming. See attached and below some suggestions. Attached doc also has some additional comments as some of the sentence you have don’t work for non-transmitted BSSIDs. Also, size of Change Sequence is TBD. Thanks, Laurent An AP within an AP MLD shall include in the Beacon and Probe Response frames it transmits a Change Sequence fields for each of
all APs in the same AP MLD.
If an AP within an AP MLD is a transmitted BSSID in a Multiple BSSID set, then the AP shall additionally:
An AP within an AP MLD shall increase the value (modulo TBD maximum value) of the Change Sequence field in the next transmitted Beacon frame(s) for the AP when a critical update occurs
for that AP. An AP within an AP MLD shall increase the value (modulo TBD maximum value) of the Change Sequence field in the next transmitted Beacon frame(s) for another AP in the same AP MLD when a critical update occurs for that AP. An AP within an AP MLD
shall increase the value (modulo TBD maximum value) of the Change Sequence field in the next transmitted Beacon frame(s) for a
nontransmitted BSSID in the same multiple BSSID set when a critical update occurs to these APs.The critical updates are defined in 11.2.3.15 (TIM Broadcast) and the TBD additional update
can be added. From: Ganming (Ming) <ming.gan@xxxxxxxxxx>
Thanks xiaofei Please see the attached file for my response Best wishes Ming Gan 发件人:
Xiaofei Wang [mailto:Xiaofei.Wang@xxxxxxxxxxxxxxxx]
Dear Ming, Thanks for preparing the document. I have a few comments in the attached document. Best regards, Xiaofei Clement Wang Principal Engineer | InterDigital T: (631)
622.4028 From: Ganming (Ming) <ming.gan@xxxxxxxxxx>
Hello Laurent and Younghoon Thanks, see attached response. Best wishes Ming Gan 发件人:
Cariou, Laurent [mailto:laurent.cariou@xxxxxxxxx]
Hi Ming, Thanks a lot. See attached some comments/suggestions. Best Laurent From: Young Hoon Kwon <younghoon.kwon@xxxxxxx>
Hi Ming, Thanks for the text. I have some comments in the attached. Thanks, Young Hoon From: Ganming (Ming) <ming.gan@xxxxxxxxxx>
Dear all TTT members for MAC-MLO-BSS Parameter Update, I uploaded it to the server, comments are welcome. https://mentor.ieee.org/802.11/dcn/20/11-20-1332-00-00be-pdt-mac-mlo-bss-parameter-update.docx Best wishes Ming Gan To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 |