Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Sure. We can do that. Please also align the description with the figure. e.g. “When transmitting, the initial state of the scrambler shall be set to
a pseudorandom nonzero state. During reception by an EHT STA, the initial state can be estimated from the 11 LSB of the service field.”
This is the description when the switch is not present. Can change the “initial state” to “initialization bits”; change “can be estimated from”
to “is”. Btw, I cannot find the definition in HE saying that reserved bits set to 0. Maybe I missed. You can point out that.
BRs, Xiaogang. From: liuchenchen <liuchenchen1@xxxxxxxxxx>
Hi Xiaogang I am now ok with your comments. But if I remove the switch in the figure, other people may have some concerns. So how about we just mark the figure of the scrambler
to yellow? Thanks BRs Chenchen Liu 发件人: Chen, Xiaogang
C [mailto:xiaogang.c.chen@xxxxxxxxx]
I mean the last page of the slides is not correct. The rest are correct. BRs, Xiaogang. From: Chen, Xiaogang C <xiaogang.c.chen@xxxxxxxxx>
Sorry Chenchen, please ignore the last slide. The sequence I typed is not the correct one. BRs, Xiaogang. From: Chen, Xiaogang C <xiaogang.c.chen@xxxxxxxxx>
Hi Chenchen I use the attached slides to explain why I proposed the new figure which is not in r3. I can explain in the call if still not clear. Another comment is why the first 7 bits in MU-RTS “should not” be all 0 instead of “shall not” be all 0? BRs, Xiaogang. From: liuchenchen <liuchenchen1@xxxxxxxxxx>
Hi Rui Thank for your comments. The PDT has been updated to r3. BRS Chenchen Liu 发件人: Rui Cao
[mailto:rui.cao_2@xxxxxxx] Hi Chenchen, Thank you for the PDT.
One quick comments: please highlight the three paragraphs in page 9 describing LTF sequences for “80+80” in the document for further discussions. Thank you, Rui From: liuchenchen <liuchenchen1@xxxxxxxxxx>
Hi Lei All your comments are accepted except the last one. I know the text can be simplified, but I think it is better to keep it the same text with the passed motions. Thanks a lot Best Regards Chenchen Liu 发件人: Lei Huang
[mailto:nusleihuang@xxxxxxxxxxx] Hi Chenchen, Thank you for preparing this PDT. Attached please find my comments. Best regards, Lei From: liuchenchen <liuchenchen1@xxxxxxxxxx>
Hi Jinyoung Thanks. It has been updated according to your comments. https://mentor.ieee.org/802.11/dcn/20/11-20-1495-01-00be-pdt-of-eht-ltf-sequences.docx Best regards Chenchen Liu 发件人:
천진영 [mailto:jiny.chun@xxxxxxx]
Hi Chenchen, Thank you for preparing the PDT drafts. I’ve added some comments in EHT-LTF draft. Please see the attached. Best regards, Jinyoung From: liuchenchen [mailto:liuchenchen1@xxxxxxxxxx]
Dear TTT members and all. The PDT draft on EHT PHY data scrambler and EHT LTF sequences has been uploaded. Please check it out and share your comments so as to make it better. https://mentor.ieee.org/802.11/dcn/20/11-20-1495-00-00be-pdt-of-eht-ltf-sequences.docx Thank you Best regards Chenchen To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 |