| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Hello,
As discussed in the joint call yesterday, there is an action item for Po-Kai, Young Hoon, and me to locate an appropriate subclause (of the SFD) for operating mode notification element and operating mode indication in A-Control because both are better not included in subclause 5 of the SFD.The following is a proposal suggested by Po-Kai and supported by Young Hoon. Please do review and see if you have any comments. I will update the SFD and volunteer assignment if I do not hear any concern by 11am ET, January 22, 2021 (Friday):First, create the following subclause in SFD.
3 EHT MAC
3.5 operating mode
3.5.1 Operating mode notification element
3.5.2 Operating mode indication in A-ctrl
Second, change the location of the following motion from 12.2 EHT operation element to 3.5.1 Operating mode notification element in SFD
The EHT operating mode change is announced by adding the additional fields (EHT Channel Width, Additional EHT Rx Nss) to the Operating Mode Notification element.
[Motion 144, #SP328, [26] and [299]]
Third, Change the location of the following motion from 5.4 Operating mode indication of 5. Wideband and noncontiguous spectrum utilization to 3.5.2 Operating mode indication in A-ctrl in SFD
A new Control ID in A-Control is defined for EHT Operating mode (OM) that enables indication of 320 MHz, Tx NSTS larger than 8, and Rx NSS larger than 8.
Signaling TBD.
[Motion 137, #SP277, [3] and [167]]
Fourth, create a separate row of 3.5.1 Operating mode notification element and 3.5.2 Operating mode indication in A-ctrl in volunteer status document. Assign Liwen as the POC for 3.5.1, and Po-Kai to be the POC of 3.5.2.Regards,
Edward
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1