| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
Hi all, I’ve uploaded R3
here. I’ve included all the feedback from the ARC meetings and many individual members offline. Please let me know if you have further comments and questions. Again, the CR is meant for describing MLO operation and MLD architecture. It’s not for legacy/MLD mixed operation. I think we could address the MLO/MLD without mixing any legacy
APs/STAs into it first and add legacy/MLD mixed operation later as needed. Thanks, Duncan From: Duncan Ho <dho@xxxxxxxxxxxxxxxx> CAUTION: This email originated from outside of
the organization. Hi Yonggang, Thanks for the comment. I’ll add it. Thanks, Duncan From: Yonggang Fang <Yonggang.Fang@xxxxxxxxxxxx>
CAUTION: This email originated from outside of
the organization. Hi Duncan, I have a comment on clause 5.1.5.1 on page 7: the clause 5.1.5.1 only mentions PTK. It may be good to mention the functions using GTK somewhere in this clause.
Thanks Yonggang From: Payam Torab [mailto:torab@xxxxxxxx]
Hi Duncan – a minor late comment; it would be good to state somewhere if MLD changes or does not change the concept of BSS (for example, something to the effect of An AP MLD has at least one BSS on each if its links after start, if there
is no change to BSS). Regards, Payam From:
Duncan Ho <dho@xxxxxxxxxxxxxxxx> Thanks Rojan for confirming. BR, Duncan From: Rojan Chitrakar <rojan.chitrakar@xxxxxxxxxxxxxxxx>
CAUTION: This email originated from outside of
the organization. Thanks Duncan, looks good to me. Regards, Rojan From: Duncan Ho <dho@xxxxxxxxxxxxxxxx>
Hi Rojan, Thanks for the comments and sorry for the delayed reply. I’ve accepted/addressed all your comments (please see my inline response to your comments attached). I’ll send out the latest version separately. Please let me know if you have more questions and comments. Thanks, Duncan From: Rojan Chitrakar <rojan.chitrakar@xxxxxxxxxxxxxxxx>
CAUTION: This email originated from outside of
the organization. Hi Duncan, Thank you for the CRs. I am generally fine with the intention of the tex. I have added my comments in the attached. Regards, Rojan From: Duncan Ho <dho@xxxxxxxxxxxxxxxx>
Hi all, Please see
https://mentor.ieee.org/802.11/dcn/21/11-21-0577-00-00be-cr-mld-architecture.docx and let me know if you have any comments or questions. Thanks, Duncan To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 *********** MEDIATEK Confidentiality Notice *********** The information contained in this e-mail message (including any attachments) may be confidential, proprietary, privileged, or otherwise exempt from disclosure under applicable laws. It is intended to be conveyed only to the designated recipient(s). Any use, dissemination, distribution, printing, retaining or copying of this e-mail (including its attachments) by unintended recipient(s) is strictly prohibited and may be unlawful. If you are not an intended recipient of this e-mail, or believe that you have received this e-mail in error, please notify the sender immediately (by replying to this e-mail), delete any and all copies of this e-mail (including any attachments) from your system, and do not disclose the content of this e-mail to any other person. Thank you! To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 |