Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Hi, Xiaofei and Srini, Thank you for your comments and I’m good with your suggestions. So I’ve updated my CRs in r2. Please see it. Best regards, Jinyoung From: Srini Kandala [mailto:srini.k1@xxxxxxxxxxx] HI Jinyoung, I am also in general good with the description. Should we somehow indicate the exclusiveness? Say, something like (in blue), An EHT beamformer that has initiated an EHT TB sounding sequence may send Regards, srini From: Xiaofei Wang [mailto:Xiaofei.Wang@xxxxxxxxxxxxxxxx] Hi Jinyoung, Thank you for the revisions. I think the direction is good. Though it is not really clearly a normative behavior. How about change the sentence into: “ An EHT beamformer that has initiated an EHT TB sounding sequence shall transmit a BFRP trigger to solicit feedback and may send Best regards, Xiaofei Clement Wang Principal Engineer | InterDigital T: (631) 622.4028 From: 천진영 <jiny.chun@xxxxxxx> Hi, Yesterday, I’ve presented 21/2013 (CRs for 35.5.3) and members want more discussion by email. So I make this email thread. The addressed issue is that: Currently, the same STA can’t be re-polled but the other STAs can be polled by additional BFRP Trigger in the same TXOP. So the current figure has some problem. So I’d like to remove the word ‘One or more sequences’ and make some changes the BFRP explanation as below. BFRP Trigger frames sent within an EHT TB sounding sequence shall solicit EHT TB PPDUs. (move from other place) An EHT beamformer that has initiated an EHT TB sounding sequence may send Please give me your opinions or good directions for the CR. Best regards, Jinyoung To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 |
Attachment:
11-21-2013-01-00be-cc36-cr-for-35.5.3_part2.docx
Description: application/haansoftdocx