Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBE] TGbe CR submission

Hi Xiaogang,

 

Thank you for your comment. I understood your concern and how about the changes as below?

 

The EHT Compressed Beamforming Report information contains the channel matrix elements indexed, first, by matrix angles in order shown in Table 9-71 (Order of angles in the compressed beamforming feedback matrix when used in a non-S1G band), and second, by data and pilot subcarrier index from lowest frequency to highest frequency shown in Table 9-127b, Table 9-127c, and Table 9-127d.

 

Best regards,

Jinyoung

 

From: Xiaogang Chen [mailto:xiaogang.chen@xxxxxxxx]
Sent: Thursday, August 25, 2022 1:15 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] TGbe CR submission

 

Hi Jinyoung,

Sorry for the slow response…regarding the proposed change for CID below, the removed text of “first…second…” contains the information of how the feedback information is organized and shouldn’t be removed IMO. Note that the ordering information are also present for HE,VHT,etc.

Can you please just address the frequency index issue from the commenter and keep the original text? Thanks.

 

 

CID

Clause

PP.LL

Comment

Proposed Change

Resolution

11628

9.4.1.71

185.62

Clarification of lowest and highest frequency for the MRU case should be added

Change text to "from the lowest frequency to the highest frequency (in case of MRU the lowest frequency stands for the lowest frequency of first RU and the highest frequency stands for the highest frequency of the last RU)"

Revised

 

There’s no definition of channel matrix element in not only 11be but also 11REVme. And subcarrier indices are described below in the same subclause. So it’s better to remove the description of ‘channel matrix element’ and ‘subcarrier index’ here to clarify.

 

Instructions to the editor:

Please make the changes as shown in doc 11-22/1131r0, below CID 11628.

 

 

BRs,

Xiaogang.

 

From: Jinyoung Chun <jiny.chun@xxxxxxx>
Sent: Tuesday, July 26, 2022 6:24 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] TGbe CR submission

 

Hi Alfred,

 

Please add the two CRs in Joint CC.

-      11-22-1131-00-00be-lb266-cr-for-9.4.1.71

-      11-22-1194-00-00be-lb266-cr-for-9.4.1.70

 

Best regards,

Jinyoung

 

From: 顾祥新 (Xiangxin Gu) [mailto:Xiangxin.Gu@xxxxxxxxxx]
Sent: Wednesday, July 27, 2022 9:46 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] TGbe CR submission

 

Hi Alfred,

 

Would you please add https://mentor.ieee.org/802.11/dcn/22/11-22-1205-00-00be-indicating-to-operate-in-eml-mode-via-ps-poll-or-qos-null.docx (1 CID) to MAC queue?

Thanks!

 

BR,

 

Xiangxin Gu

Communication Standards Devision

 

 

From: Minyoung Park <mpark.ieee@xxxxxxxxx>
Sent: Wednesday, July 27, 2022 8:29 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] TGbe CR submission

 

Hi Alfred,

 

Please add 11-22/1204r0 (20 CIDs) to the MAC queue. 

 

Thanks,

Minyoung

 

 

On Tue, Jul 26, 2022 at 3:38 PM Huang, Po-kai <po-kai.huang@xxxxxxxxx> wrote:

Hi Alfred,

 

                Please 11-22/1054r0 (46 CIDs) to the MAC queue.

 

Best,

Po-Kai

 

From: Huang, Po-kai <po-kai.huang@xxxxxxxxx>
Sent: Sunday, July 24, 2022 4:14 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] TGbe CR submission

 

Hi Alfred,

 

                Please add 11-22/1174r0 (7 CIDs) to the MAC queue.

 

Best,

Po-Kai

 

From: Minyoung Park <mpark.ieee@xxxxxxxxx>
Sent: Friday, July 22, 2022 5:52 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] TGbe CR submission

 

Hi Alfred,

 

Please add 11-22/1181r0 to the MAC queue (will be ready to review on 1st week of August). The CR doc resolves 31 comments.

 

Thanks,

Minyoung

 

On Fri, Jul 22, 2022 at 4:39 PM Yanjun Sun <yanjuns@xxxxxxxxxxxxxxxx> wrote:

Hi Alfred,

 

Could you help add 22/1177r0 (CR on 35.2.2, 15 CIDs) to the join queue? I’ll upload the document soon.

 

Thanks

Yanjun

 

From: Rajat PUSHKARNA <rajat.pushkarna@xxxxxxxxxxxxxxxx>
Sent: Thursday, July 21, 2022 6:59 PM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] TGbe CR submission

 

WARNING: This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.

Hi Alfred,

 

Could you please help to add CR document 22/1165r0 resolving comments related to Annex-B to the Joint queue? The document can be found at: https://mentor.ieee.org/802.11/dcn/22/11-22-1165-00-00be-lb266-cr-document-resolving-comments-related-to-annex-b.docx

 

Thanks.

 

Best Regards,

Rajat.

 

From: Yanyi Ding <yanyi.ding@xxxxxxxxxxxxxxxx>
Sent: Friday, 22 July 2022 9:54 am
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] TGbe CR submission

 

Hi Alfred,

 

Could you please add the following CR to the joint queue? Thanks.

 

13-Jul-2022 ET

2022

1120

0

TGbe

LB266 CR for CIDs of 4.3.16a

Yanyi Ding (Panasonic)

19-Jul-2022 22:10:34 ET

Download

 

Best regards,

Yanyi

From: Yanjun Sun <yanjuns@xxxxxxxxxxxxxxxx>
Sent: Thursday, July 21, 2022 1:58 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] TGbe CR submission

 

Hi Alfred and all,

 

Could you help add the following CR to the joint queue?

1124

1

TGbe

LB266 CR for 9.3.1.22 MISC

Download

 

I’ve revised the resolution based on inputs from Greg, Dibakar, Liwen and Ross. Based on Srini’s inputs, I’ve also added some discussion text on the context.

 

 

Thanks

Yanjun

 

 

From: 李雅璞(Yapu) <00001b0ec2563bd4-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Wednesday, July 20, 2022 1:40 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBE] TGbe PHY CR submission

 

Hi, Alfred

 

Could you add the following document to the PHY queue?

 

20-Jul-2022 ET

2022

1169

0

TGbe

LB266-CR-on-CID 12138-12139-12140

Yapu Li (OPPO)

20-Jul-2022 04:28:05 ET

Download

 

Thanks

Yapu

 

发件人: Yan(MSI) Zhang <yan.zhang_5@xxxxxxx>
发送时间: 2022年7月19日 2:55
收件人: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
主题: [STDS-802-11-TGBE] TGbe PHY CR submission

 

Hi Alfred, Siguard, Tianyu,

 

  Can you add the following documents to the PHY queue?

 

18-Jul-2022 ET

2022

1163

0

TGbe

11be lb266 CR for clause 36.3.14 Packet Extension

Yan Zhang (NXP)

 

18-Jul-2022 ET

2022

1164

0

TGbe

11be lb266 CR for Clause 36.3.11 Mathematical description of signals

Yan Zhang (NXP)

 

Thanks

Yan

 

From: humengshi <0000179fd8c5ace5-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Tuesday, July 12, 2022 5:49 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: [EXT] [STDS-802-11-TGBE] 答复: [STDS-802-11-TGBE] TGbe PHY ad-hoc Session -Monday PM2- Cancellation Notice

 

Caution: EXT Email

Hi Alfred,

 

Could you add the following documents to the PHY queue?

11-Jul-2022 ET

2022

1063

0

TGbe

LB266 CR for 36.3.16 Transmit Requirements

Mengshi Hu (Huawei)

12-Jul-2022 08:37:40 ET

Download, Revise

11-Jul-2022 ET

2022

1064

0

TGbe

LB266 CR for 9.4.2.313.5 EHT PPE Thresholds Field

Mengshi Hu (Huawei)

12-Jul-2022 08:38:18 ET

Download, Revise

11-Jul-2022 ET

2022

1076

0

TGbe

LB266 CR for 36.2.2 RU_ALLOCATION

Mengshi Hu (Huawei)

12-Jul-2022 08:38:44 ET

Download, Revise

 

Best regards,

Mengshi Hu

 

发件人: Kanke Wu <kankew@xxxxxxxxxxxxxxxx>
发送时间: 2022年7月12日 12:48
收件人: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
主题: Re: [STDS-802-11-TGBE] TGbe PHY ad-hoc Session -Monday PM2- Cancellation Notice

 

Hi Alfred,

 

Can you add the following document to the PHY queue?

 

11-Jul-2022 ET

2022

1080

0

TGbe

LB266 CR on EHT PHY Introduction-1

Kanke Wu (Qualcomm)

12-Jul-2022 00:44:59 ET

Download

 

Thanks,

Kanke

 

 

From: Alfred Asterjadhi <asterjadhi@xxxxxxxxx>
Sent: Monday, July 11, 2022 6:48 AM
To: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBE] TGbe PHY ad-hoc Session -Monday PM2- Cancellation Notice

 

WARNING: This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.

Hello all,

 

PHY ad-hoc has finished processing the CR queue and hence Monday PHY PM2 session is cancelled. 


Please let us know if you have any submissions to be added to the PHY queue. 

 

Regards,


Alfred

 

--

Alfred Asterjadhi, PhD

IEEE802.11 TGbe Chair,

Qualcomm Technologies Inc.

Cell #:    +1 858 263 9445

Office #: +1 858 658 5302

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

OPPO

 

本电子邮件及其附件含有OPPO公司的保密信息，仅限于邮件指明的收件人使用（包含个人及群组）。禁止任何人在未经授权的情况下以任何形式使用。如果您错收了本邮件，请立即以电子邮件通知发件人并删除本邮件及其附件。

This e-mail and its attachments contain confidential information from OPPO, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1