Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Hi Frank,
As per the current CR document, the group link indication has no impact on the buffering of group addressed frames at the AP. The AP still buffers group addressed frames on
all the links (as in baseline spec). The indication of group link is to help minimize the number of links on which the AP needs to provide the “protection mechanism” of receiving group-addressed frames, by terminating frame exchanges with an EMLSR or NSTR
non-AP MLD. If I am not wrong, there was significant discussion in last round CC36 on the topic of whether group addressed frames need to be buffered on all links (in the context of assigning
sequence numbers) and I think the consensus was yes they should. Regards, Vishnu From: Frank Hsu (徐建芳)
<frank.hsu@xxxxxxxxxxxx> Hi, Vishnu, Thanks for the document. I have a comment regarding the group link indication. You mentioned that
“this feature we don’t require a response frame from AP MLD”. I am considering a scenario where AP MLD buffers group addressed frames for a non-AP MLD based on the previous group link indication, say on link 1, but before transmission,
the AP MLD receives new group link indication which has different link indication from the previous one, say link 2. Depending on the design, AP MLD may not transmit those frames on link 2. It looks in this scenario, AP MLD needs to notify the non-AP MLD when the latest group link indication is going to be executed by the AP MLD. That means, a response from AP MLD is necessary, especially when the group link indication is changed. How do you think? BRs, Frank From: Vishnu Ratnam <vishnu.r@xxxxxxxxxxx>
Dear all, Thank you for discussion during the meeting on CR doc 1335 (Group addressed frame reception in EMLSR/NSTR). I summarize below the comments discussed
on the call, and I look forward to additional feedback which was not discussed during the meeting:
Kindly let me know if I missed any of the comments on call. I would also appreciate if you can share feedback on CIDs which were not discussed during
the meeting: [10039][10863][12726][12728][12892][13588][13813]
and [10008][11594][13589]. Regards, Vishnu From: Vishnu Vardhan Ratnam <vishnu.r@xxxxxxxxxxx>
Hi Xiangxin, Please find my responses inline. Regards, Vishnu From:
顾祥新 (Xiangxin Gu) <Xiangxin.Gu@xxxxxxxxxx>
Hi Vishnu, Thanks for your response. I make inline reply. From: Vishnu Ratnam <vishnu.r@xxxxxxxxxxx>
Hi Xiangxin, Thank you for your comments and initiating the discussion.
[// Xiangxin Gu] If this mechanism is incorporated, there is no reason for an AP MLD not to support this because
it make the AP MLD easier to operating with EMLSR/EMLMR mode. So I don’t understand why the capability indication is needed. [VR] Since there are conflicting opinions on this, let us discuss this during the call to see what the group generally prefers.
I would be happy to also collect other opinions of this as a response here to see which approach is more preferred.
[// Xiangxin Gu] Agree.
Further, an indication on whether there is services over group addressed frames other than Beacon frames at non-AP
MLD side is suggested. Because it is gainful that the duration of transmission of these frames doesn’t need to be kept away from EML frame exchanges if no such services at non-AP MLD side. These frames occupy much more time than Beacon
frame. Moreover, for EMLMR, in case some RF chains are kept at the STAs on other links during the EML frame exchange,
there is no need for EML frame exchanges to be away from the duration of transmission of group addressed frames on any links. For example, a multi-radio non-AP MLD with 3 affiliated STA1 and STA 2 and STA 3 setups link 1 and 2 and link 3 respectively with
AP 1 and AP2 and AP3 affiliated with an AP MLD. All STAs support 2 SS. The non-AP MLD supports EMLMR mode, and has enabled EMLMR mode with 4 SS on link 1 and link 2 and link 3. The EMLMR mode does not use all RF chains of the non-AP MLD. [VR] Regarding the indication of group addressed frame services, I see your point, But I think the issue may be that group
addressed management frames are also buffered and transmitted after the DTIM beacon, and they can be meant for all non-AP MLDs. So even if a non-AP MLD is not subscribed to a group addressed service, it may want to decode the group addressed frames. Note that
as of now there is no indication in TIM regarding whether the buffered group-addressed frames are data frames or management frames (there are some CIDs on that topic), so the non-AP MLD may not know if it can stop decoding.
Since many things regarding EMLMR are yet unclear, I removed the clause corresponding to EMLMR from the document. There
are other CIDs for EMLMR section that can be used to extend this procedure for EMLMR. I encourage you to bring this idea up during the resolution of those CIDs.
[// Xiangxin Gu] Yes, we have to make decision for the tradeoff. Actually I doubt such flexibility make sense
in practice. [VR] Since there are conflicting opinions on this, let us discuss this during the call to see what the group generally prefers,
I would be happy to also collect other opinions of this as a response here to preemptively see which option is more preferred. Regards, Vishnu From:
顾祥新 (Xiangxin Gu) <Xiangxin.Gu@xxxxxxxxxx>
Hi Vishnu, Thanks for the contribution document 22/1335r0, I have concerns:
From: Vishnu Ratnam <vishnu.r@xxxxxxxxxxx>
Hi Alfred, Could you kindly add the following document to the MAC queue. It resolves 13 CIDs.
In addition, I have uploaded the 1201r1 which is a PDT (in place of 1201r0 which was a ppt). As discussed, could you kindly move that
document to the MAC Comment Resolution queue from the contribution queue? It resolves 1 CID.
Thanking you, Vishnu From: Edward Au <edward.ks.au@xxxxxxxxx>
Dear Alfred and all, Revision 16 of the comment spreadsheet is posted: This version updated the status of selected CIDs after the motions on Wednesday, together with a few TTT assignments and PoC reassignment. Regards, To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
This email (including its attachments) is intended only for the person or entity to which it is addressed and may contain information
that is privileged, confidential or otherwise protected from disclosure. Unauthorized use, dissemination, distribution or copying of this email or the information herein or taking any action in reliance on the contents of this email or the information herein,
by anyone other than the intended recipient, or an employee or agent responsible for delivering the message to the intended recipient, is strictly prohibited. If you are not the intended recipient, please do not read, copy, use or disclose any part of this
e-mail to others. Please notify the sender immediately and permanently delete this e-mail and any attachments if you received it in error. Internet communications cannot be guaranteed to be timely, secure, error-free or virus-free. The sender does not accept
liability for any errors or omissions. This email (including its attachments) is intended only for the person or entity to which it is addressed and may contain information
that is privileged, confidential or otherwise protected from disclosure. Unauthorized use, dissemination, distribution or copying of this email or the information herein or taking any action in reliance on the contents of this email or the information herein,
by anyone other than the intended recipient, or an employee or agent responsible for delivering the message to the intended recipient, is strictly prohibited. If you are not the intended recipient, please do not read, copy, use or disclose any part of this
e-mail to others. Please notify the sender immediately and permanently delete this e-mail and any attachments if you received it in error. Internet communications cannot be guaranteed to be timely, secure, error-free or virus-free. The sender does not accept
liability for any errors or omissions. To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1
To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 |