Thread Links | Date Links | ||||
---|---|---|---|---|---|
Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
Hi Jinyoung and Bin, I totally agree with Bin’s philosophy and suggestion. However, “determined” seems a bit redundant because it already has “based on the Partial BW Info subfield ”. So I am wondering if we can remove “and determined”.
Or can we say “for all the subcarrier indices that need to be fed back based on the Partial BW Info subfield and determined
by Thanks, Zinan
The EHT Compressed Beamforming Report information contains the channel matrix elements indexed, first, by matrix angles in order shown in Table 9-71 (Order of angles in the compressed
beamforming feedback matrix when used in a non-S1G band), and second, by data and pilot subcarrier index from the lowest frequency to the highest frequency
for all the subcarrier indices that need to be fed back based on the Partial BW Info subfield and determined
as shown in Table 9-127b (Subcarrier
indices when not all bits in Partial BW Info subfield corresponding to the 80 MHz frequency subblock are set to 1), Table 9-127c (Subcarrier indices when all bits in Partial BW Info subfield corresponding to the 80 MHz frequency subblock are set to 1 for
Ng = 4), and Table 9-127d (Subcarrier indices when all bits in Partial BW Info subfield corresponding to the 80 MHz frequency subblock are set to 1 for Ng = 16). From: Jinyoung Chun <jiny.chun@xxxxxxx>
Hi Bin, Thank you for your suggestion, and it looks clearer to me. If somebody has any opinion, please let me know. Best regards, Jinyoung From: Bin Tian [mailto:btian@xxxxxxxxxxxxxxxx]
Hi Jinyoung The term MRU brings more confusion since the feedback tone indices are solely determined based on a partial BW bitmap. Among all these tones need to be fed back, we just order them based on the frequency
from low to high. How about using the following text
The EHT Compressed Beamforming Report information contains the channel matrix elements indexed, first, by matrix angles in order shown in Table 9-71 (Order of angles in the compressed
beamforming feedback matrix when used in a non-S1G band), and second, by data and pilot subcarrier index from the lowest frequency to the highest frequency
for all the subcarrier indices that need to be fed back based on the Partial BW Info subfield and determined
Thanks, Bin From: Jinyoung Chun <jiny.chun@xxxxxxx>
WARNING:
This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros. Hi, All, I’ve presented CRs on
9.4.1.71 in Joint CC and the CID was deferred for more discussion. Please let me know your opinion about the CID.
Best regards, Jinyoung From: Jinyoung Chun [mailto:jiny.chun@xxxxxxx]
Hi Alfred, Please add the following 3 CRs in the Queue.
Best regards, Jinyoung From: Yan(MSI) Zhang [mailto:yan.zhang_5@xxxxxxx]
Hi Alfred, Could you please add the following 2 CR documents to 11be PHY queue? 23/0422r0 11be lb271 CR for Clause 36.3.11 Mathematical description of signals Yan Zhang (NXP Semiconductor) 23/0427r0 11be lb271 CR for clause
36.3.13.3 Coding Yan Zhang (NXP Semiconductor) Thanks Yan From: Alfred Asterjadhi <asterjadhi@xxxxxxxxx>
Caution:
EXT Email
Hello all, I uploaded the telco agendas for the upcoming week. - Mar 6 Monday – MAC/PHY 19:00-21:00 ET - Mar 8 Wednesday – Joint 10:00-12:00 ET Link: https://mentor.ieee.org/802.11/dcn/23/11-23-0269-00-00be-jan-mar-tgbe-teleconference-agenda.docx We will use these telcos to review and continue LB comment assignments. Let me know if you have any questions. Regards,
-- Alfred Asterjadhi, PhD IEEE802.11 TGbe Chair, Qualcomm Technologies Inc. Cell #: +1 858 263 9445 Office #: +1 858 658 5302 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1 |