Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[STDS-802-11-TGBF] 答复: TGbf meeting on February 7, 8, 10



Hi Pei,

 

I don’t have any problem with the MS ID included in the SBP response frame, I only have concern about the time of the transmission of the SBP response frame, it seems have two ways, either before the measurement setup procedure or after the measurement setup procedure, to me after the measurement setup procedure is natural way, therefore would you consider to add a note “the time of the transmission of the SBP response is TBD” in the motion text.

 

Best Regards

Xiandong

 

发件人: 周培(Pei Zhou) <00001462c7c6c67a-dmarc-request@xxxxxxxxxxxxxxxxx>
发送时间: 2022210 18:23
收件人: STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
主题: [STDS-802-11-TGBF] 转发: TGbf meeting on February 7, 8, 10

 

Hi Tony,

 

I ran the SP of 11-22/0125 Discussion on Measurement Setup ID Setting in SBP Case in Monday.

q  Do you support the method of assigning Measurement Setup ID for the SBP Requesting STA in Sensing by proxy (SBP) procedure?

l  AP assigns the Measurement Setup ID in its SBP Response frame.

The result is Yes/No/Abstain: 20/2/17.

 

Therefore, I request to add the following motion to the motion list, thanks.

Move to add the following to the TGbf SFD:

l  The method of assigning Measurement Setup ID for the SBP Requesting STA in Sensing by proxy (SBP) procedure is that AP assigns the Measurement Setup ID in its SBP Response frame.

 

Best regards,

Pei

 

发件人: stds-802-11-tgbf@xxxxxxxxxxxxxxxxx <stds-802-11-tgbf@xxxxxxxxxxxxxxxxx> 代表 luochaoming@xxxxxxxx
发送时间: 2022210 18:07
收件人: Hanxiao (Tony, WT Lab) <0000177ab8f731c4-dmarc-request@xxxxxxxxxxxxxxxxx>; STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
主题: Re: TGbf meeting on February 7, 8, 10

 

Hi All,

 

I plan to run the following motions, and if you have any further comment or concern, please do send me an email, thanks!

Tony, please help to add the following two motion requests:

 

Motion 1, Ref: 22/0286r1, SP1 18Y/3N/15A 

Move to add the following to the TGbf SFD:

       PASN for unassociated STA is used in sensing.

 

Motion 2, Ref: 22/0286r1, SP2 14Y/3N/18A 

Move to add the following to the TGbf SFD:

A new action category of robust ‘Protected Sensing Frame’ is defined to separate PN segment.

 

BR,

Chaoming


 

发件人: Hanxiao (Tony, WT Lab)

发送时间: 2022-02-10 17:51

主题: 答复: TGbf meeting on February 7, 8, 10

Hi Sang, Solomon,

         AddedJ

 

 

Best Regards : )

Tony Xiao Han

 

发件人: Solomon Trainin [mailto:strainin@xxxxxxxxxxxxxxxx]
发送时间: 2022210 17:13
收件人: Hanxiao (Tony, WT Lab) <tony.hanxiao@xxxxxxxxxx>; STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
主题: RE: TGbf meeting on February 7, 8, 10

 

Hi Tony,

Please add to the agenda presentation of the 11-22-0243-01-00bf PDT DMG Sensing procedure (~30min)

 

Best  regards,

Solomon Trainin

+972547885738

 

From: Hanxiao (Tony, WT Lab) <0000177ab8f731c4-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Monday, February 7, 2022 5:23 AM
To: STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBF]
答复: TGbf meeting on February 7, 8, 10

 

WARNING: This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.

Dear all,

After a long break, this is a reminder and call for submissions for the upcoming meeting on:

    February 7  (Monday),  9am - 11:00am ET

    February 8   (Tuesday),  9am - 11:00am ET

    February 10  (Thursday), 10pm - 12:00am ET

 

Agenda is posted: https://mentor.ieee.org/802.11/dcn/22/11-22-0232-00-00bf-tgbf-meeting-agenda-2022-02-03.pptx

 

Best Regards : )

Tony Xiao Han

 

发件人: Hanxiao (Tony, WT Lab) [mailto:0000177ab8f731c4-dmarc-request@xxxxxxxxxxxxxxxxx]
发送时间: 2022129 9:28
收件人: STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
主题: [STDS-802-11-TGBF] TGbf meeting on February 7, 8, 10

 

Dear all,

This is a reminder and call for submissions for the upcoming meeting on:

    February 7  (Monday),  9am - 11:00am ET

    February 8   (Tuesday),  9am - 11:00am ET

    February 10  (Thursday), 10pm - 12:00am ET

        

 

Please note:

1.      Please send the agenda request at least 24 hours prior to the call, following the format below:

     DCN, Title, Author (affiliation), Time duration

2.      I will cancel the call if there is no request received 24 hours prior to a call.

3.      Please upload your submissions (revision 0) on mentor 24 hours prior to the meeting so that members would have a chance to review those submissions offline. Otherwise,

a.      If there is not enough time during the meeting, the presentation will be delayed to the next meeting.

b.      If there is enough time during the meeting, the presentation will be moved to the end of the queue and be presented in the end. However, any related SP should be delayed to the next meeting.

4.      Please send the motion request (with related DCN, and SP result) around 10+5 days before the meeting (for teleconference, not for Plenary or Interim meeting), so that the TG chair could send the 10 day advance notice to the 802.11 reflector, after getting the approval from the WG chair.

5.      Dial-in information:

 

February 7  (Monday)

Join the Webex meeting here: https://ieeesa.webex.com/ieeesa/j.php?MTID=m3f2fee6b1e77ddc9c9c784d35e040864

Meeting number: 233 704 78385

Meeting password: wireless (94735377 from phones and video systems)

Join by phone: Tap to call in from a mobile device (attendees only) +1-408-418-9388 USA Toll
Global call-in numbers

Access code: 233 704 78385

Join from a video system or application Dial 23370478385@xxxxxxxxxxxxxxxx You can also dial 173.243.2.68 and enter your meeting number.

Join using Microsoft Lync or Microsoft Skype for Business Dial 23370478385.ieeesa@xxxxxxxxxxxxxx

Need help? Go to http://help.webex.com

 

February 8   (Tuesday)
Join the Webex meeting here: https://ieeesa.webex.com/ieeesa/j.php?MTID=m864481d2520289545dda44964d1f86dc

Meeting number: 234 974 30736

Meeting password: wireless (94735377 from phones and video systems)

Join by phone: Tap to call in from a mobile device (attendees only) +1-408-418-9388 USA Toll
Global call-in numbers

Access code: 234 974 30736

Join from a video system or application Dial 23497430736@xxxxxxxxxxxxxxxx You can also dial 173.243.2.68 and enter your meeting number.

Join using Microsoft Lync or Microsoft Skype for Business Dial 23497430736.ieeesa@xxxxxxxxxxxxxx

Need help? Go to http://help.webex.com

 

 

February 10 (Thursday)

Join the Webex meeting here: https://ieeesa.webex.com/ieeesa/j.php?MTID=mb411ded005feced31c88734b6664727f

Meeting number: 234 946 32217

Meeting password: wireless (94735377 from phones and video systems)

Join by phone: Tap to call in from a mobile device (attendees only) +1-408-418-9388 USA Toll
Global call-in numbers

Access code: 234 946 32217

Join from a video system or application Dial 23494632217@xxxxxxxxxxxxxxxx You can also dial 173.243.2.68 and enter your meeting number.

Join using Microsoft Lync or Microsoft Skype for Business Dial 23494632217.ieeesa@xxxxxxxxxxxxxx

Need help? Go to http://help.webex.com

 

Best Regards : )

Tony Xiao Han


To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1


To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1


To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1


OPPO

 

本电子邮件及其附件含有OPPO公司的保密信息,仅限于邮件指明的收件人使用(包含个人及群组)。禁止任何人在未经授权的情况下以任何形式使用。如果您错收了本邮件,请立即以电子邮件通知发件人并删除本邮件及其附件。

This e-mail and its attachments contain confidential information from OPPO, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!


To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1


To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1


To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1