Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBF] TGbf meeting on February 7, 8, 10



Hi Rojan,

In my understanding we should put things with motion(s) into the D0.1,  but time is limited so we're kind of in parallel when writing PDT if the related idea/text is tend to get agreed. So I think a separate motion would help, and anyway there is no harm to clarify it right?

BR,
Chaoming
From: Rojan Chitrakar
Date: 2022-02-14 15:06
To: luochaoming@xxxxxxxx; STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
Subject: RE: [STDS-802-11-TGBF] TGbf meeting on February 7, 8, 10

Hi Chaoming and all,

 

Actually I see that Claudio has already added the Protected Sensing Action frame in 0235r1 :

 

So do we still need this motion? Ali has clarified that the only other thing needed in the specs is that a separate reply counter is defined for proteted sensing frame, which I believe can also be included during PDT writing without needing explicit motion.

 

Regards,

Rojan

 

From: luochaoming@xxxxxxxx <000015d97e832564-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Friday, February 11, 2022 4:07 PM
To: STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBF] TGbf meeting on February 7, 8, 10

 

Hi Xiandong,

 

I think I have a previous SP (to run as motion #61) saying we need both public and protected action frames. 

However, motion #61 does not decide whether the protected action frames use the "Protected Dual of Public Action" category or add a new category. This new motion clarifies that we add a new category and the reason is to separate PN segment.

And I think the protected action frames are used by both associated and unassociated STAs.

 

BR,

Chaoming

发件人: 董贤东

发送时间: 2022-02-11 10:36

主题: 答复: [STDS-802-11-TGBF] TGbf meeting on February 7, 8, 10

Hi Chaoming,

 

My interpretation is that the key purpose of the  ‘Protected Sensing Frame’ is defined to use for the measurement setup procedure, the sensing measurement and sensing result reporting procedure etc. especially by unassociated STA.

 

Best regards

Xiandong

 

发件人: luochaoming@xxxxxxxx <luochaoming@xxxxxxxx>
发送时间: 2022211 10:21
收件人: 董贤东 <dongxiandong@xxxxxxxxxx>; STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
主题: Re: [STDS-802-11-TGBF] TGbf meeting on February 7, 8, 10

 

Hi Xiandong,

 

I do not quite get your point, could you explain more? Or do you have a suggestion for a better wording?

 

BR,

Chaoming

发件人: 董贤东

发送时间: 2022-02-11 10:07

主题: 答复: [STDS-802-11-TGBF] TGbf meeting on February 7, 8, 10

Hi all,

 

It seems that the only purpose of the ‘Protected Sensing Frame’ is defined to separate the PN segment, but actually it is not.

 

Best Regards

Xiandong Dong

 

发件人: luochaoming@xxxxxxxx <000015d97e832564-dmarc-request@xxxxxxxxxxxxxxxxx>
发送时间: 2022211 9:39
收件人: STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
主题: Re: [STDS-802-11-TGBF] TGbf meeting on February 7, 8, 10

 

Hi Rojan and Ali,

 

Thanks Ali for the clarification, that's exactly the intention of the motion. 

And Rojan, I don't have a better wording than "separate PN segment", so if you could suggest a better one, please do let me know, thanks very much. Or would "separate PN space" be better?

 

BR,

Chaoming

From: Ali Raissinia

Date: 2022-02-11 00:59

Subject: RE: [STDS-802-11-TGBF] TGbf meeting on February 7, 8, 10

From standard point of view, we just need to define a different replay counter for Protected Sensing Frames- which essentially says it all.

 

Ali

 

From: Rojan Chitrakar <rojan.chitrakar@xxxxxxxxxxxxxxxx>
Sent: Thursday, February 10, 2022 8:40 AM
To: STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBF] TGbf meeting on February 7, 8, 10

 

WARNING: This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.

Hi Ali,

 

Thanks for the clarification, I understand the intention better and am fine if Chao Ming wants to keep it in the motion.

 

However, personally I would still think PN segmentation is an implementation specific solution; I don’t believe .11 spec needs to define it. As long as it is ensured that the PN is incremented for each new frame and never repeats, replay attacks are prevented.

 

Regards,

Rojan

 

From: Ali Raissinia <alirezar@xxxxxxxxxxxxxxxx>
Sent: Friday, February 11, 2022 12:16 AM
To: Rojan Chitrakar <rojan.chitrakar@xxxxxxxxxxxxxxxx>; STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
Subject: RE: [STDS-802-11-TGBF] TGbf meeting on February 7, 8, 10

 

Once a device is associated, it derives a PTK and a corresponding PN sequence for packet transmissions (PN is coupled to PTK). Since frames are in general classified (i.e. TIDs) and sent out of order then for each classification a PN segment is assigned (i.e. PN=10000 to 50000) so that receiver can track and if needed detect a replay attack. The ‘Protected sensing frames’ cannot share the same PN segment as Protected Dual Public Action frames since they would need to be transmitted when TB/NTB measurement instant occurs regardless.

 

Regards,

Ali

 

From: Rojan Chitrakar <rojan.chitrakar@xxxxxxxxxxxxxxxx>
Sent: Thursday, February 10, 2022 7:34 AM
To: STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBF] TGbf meeting on February 7, 8, 10

 

WARNING: This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.

Hi Chao Ming,

 

I have a question regarding motion 2:

 

A new action category of robust ‘Protected Sensing Frame’ is defined to separate PN segment.

 

What is the meaning of “..to separate PN segment”? Is it necessary to include this in the motion? PNs are tied to the keys that are used to protect the frame; if the keys are different, the PN space will be automatically different as well.

 

Regards,

Rojan

 

From: luochaoming@xxxxxxxx <000015d97e832564-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Thursday, February 10, 2022 6:07 PM
To: STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBF] TGbf meeting on February 7, 8, 10

 

Hi All,

 

I plan to run the following motions, and if you have any further comment or concern, please do send me an email, thanks!

Tony, please help to add the following two motion requests:

 

Motion 1, Ref: 22/0286r1, SP1 18Y/3N/15A 

Move to add the following to the TGbf SFD:

    • PASN for unassociated STA is used in sensing.

 

Motion 2, Ref: 22/0286r1, SP2 14Y/3N/18A 

Move to add the following to the TGbf SFD:

A new action category of robust ‘Protected Sensing Frame’ is defined to separate PN segment.

 

BR,

Chaoming


 

发件人: Hanxiao (Tony, WT Lab)

发送时间: 2022-02-10 17:51

主题: 答复: TGbf meeting on February 7, 8, 10

Hi Sang, Solomon,

         AddedJ

 

 

Best Regards : )

Tony Xiao Han

 

发件人: Solomon Trainin [mailto:strainin@xxxxxxxxxxxxxxxx]
发送时间: 2022210 17:13
收件人: Hanxiao (Tony, WT Lab) <tony.hanxiao@xxxxxxxxxx>; STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
主题: RE: TGbf meeting on February 7, 8, 10

 

Hi Tony,

Please add to the agenda presentation of the 11-22-0243-01-00bf PDT DMG Sensing procedure (~30min)

 

Best  regards,

Solomon Trainin

+972547885738

 

From: Hanxiao (Tony, WT Lab) <0000177ab8f731c4-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Monday, February 7, 2022 5:23 AM
To: STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBF]
答复: TGbf meeting on February 7, 8, 10

 

WARNING: This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.

Dear all,

After a long break, this is a reminder and call for submissions for the upcoming meeting on:

    February 7  (Monday),  9am - 11:00am ET

    February 8   (Tuesday),  9am - 11:00am ET

    February 10  (Thursday), 10pm - 12:00am ET

 

Agenda is posted: https://mentor.ieee.org/802.11/dcn/22/11-22-0232-00-00bf-tgbf-meeting-agenda-2022-02-03.pptx

 

Best Regards : )

Tony Xiao Han

 

发件人: Hanxiao (Tony, WT Lab) [mailto:0000177ab8f731c4-dmarc-request@xxxxxxxxxxxxxxxxx]
发送时间: 2022129 9:28
收件人: STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
主题: [STDS-802-11-TGBF] TGbf meeting on February 7, 8, 10

 

Dear all,

This is a reminder and call for submissions for the upcoming meeting on:

    February 7  (Monday),  9am - 11:00am ET

    February 8   (Tuesday),  9am - 11:00am ET

    February 10  (Thursday), 10pm - 12:00am ET

        

 

Please note:

1.      Please send the agenda request at least 24 hours prior to the call, following the format below:

     DCN, Title, Author (affiliation), Time duration

2.      I will cancel the call if there is no request received 24 hours prior to a call.

3.      Please upload your submissions (revision 0) on mentor 24 hours prior to the meeting so that members would have a chance to review those submissions offline. Otherwise,

a.      If there is not enough time during the meeting, the presentation will be delayed to the next meeting.

b.      If there is enough time during the meeting, the presentation will be moved to the end of the queue and be presented in the end. However, any related SP should be delayed to the next meeting.

4.      Please send the motion request (with related DCN, and SP result) around 10+5 days before the meeting (for teleconference, not for Plenary or Interim meeting), so that the TG chair could send the 10 day advance notice to the 802.11 reflector, after getting the approval from the WG chair.

5.      Dial-in information:

 

February 7  (Monday)

Join the Webex meeting here: https://ieeesa.webex.com/ieeesa/j.php?MTID=m3f2fee6b1e77ddc9c9c784d35e040864

Meeting number: 233 704 78385

Meeting password: wireless (94735377 from phones and video systems)

Join by phone: Tap to call in from a mobile device (attendees only) +1-408-418-9388 USA Toll
Global call-in numbers

Access code: 233 704 78385

Join from a video system or application Dial 23370478385@xxxxxxxxxxxxxxxx You can also dial 173.243.2.68 and enter your meeting number.

Join using Microsoft Lync or Microsoft Skype for Business Dial 23370478385.ieeesa@xxxxxxxxxxxxxx

Need help? Go to http://help.webex.com

 

February 8   (Tuesday)
Join the Webex meeting here: https://ieeesa.webex.com/ieeesa/j.php?MTID=m864481d2520289545dda44964d1f86dc

Meeting number: 234 974 30736

Meeting password: wireless (94735377 from phones and video systems)

Join by phone: Tap to call in from a mobile device (attendees only) +1-408-418-9388 USA Toll
Global call-in numbers

Access code: 234 974 30736

Join from a video system or application Dial 23497430736@xxxxxxxxxxxxxxxx You can also dial 173.243.2.68 and enter your meeting number.

Join using Microsoft Lync or Microsoft Skype for Business Dial 23497430736.ieeesa@xxxxxxxxxxxxxx

Need help? Go to http://help.webex.com

 

 

February 10 (Thursday)

Join the Webex meeting here: https://ieeesa.webex.com/ieeesa/j.php?MTID=mb411ded005feced31c88734b6664727f

Meeting number: 234 946 32217

Meeting password: wireless (94735377 from phones and video systems)

Join by phone: Tap to call in from a mobile device (attendees only) +1-408-418-9388 USA Toll
Global call-in numbers

Access code: 234 946 32217

Join from a video system or application Dial 23494632217@xxxxxxxxxxxxxxxx You can also dial 173.243.2.68 and enter your meeting number.

Join using Microsoft Lync or Microsoft Skype for Business Dial 23494632217.ieeesa@xxxxxxxxxxxxxx

Need help? Go to http://help.webex.com

 

Best Regards : )

Tony Xiao Han


To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1


To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1


To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1


OPPO

 

本电子邮件及其附件含有OPPO公司的保密信息,仅限于邮件指明的收件人使用(包含个人及群组)。禁止任何人在未经授权的情况下以任何形式使用。如果您错收了本邮件,请立即以电子邮件通知发件人并删除本邮件及其附件。

This e-mail and its attachments contain confidential information from OPPO, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!


To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1


To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1


To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1


To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1


To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1


To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1


To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1