| Thread Links | Date Links | ||||
|---|---|---|---|---|---|
| Thread Prev | Thread Next | Thread Index | Date Prev | Date Next | Date Index |
|
Pei,
I agree with you it is up to the SBP responder/initiator’s decision to initiate the SBP termination procedure, but what I described is one of the
conditions that the SBP initiator/responder may initiate the SBP termination procedure, because the SBP responder/SBP initiator has find one of the sensing responders has drop from the sensing measurement. Best Regards Xiandong
发件人:
周培(Pei Zhou) <zhoupei1@xxxxxxxx>
Hi Xiandong, Thanks for providing your feedback.
As I explained in the teleconference, in your described case whether SBP termination procedure is performed or not depends on AP’s decision. The sensing responder
doesn’t trigger the SBP termination procedure. I believe many TGbf members also explained to you and elaborated the same opinion.
Best regards, Pei 发件人:
董贤东 <dongxiandong@xxxxxxxxxx>
Hi Pei, Thanks for preparing the CR, regarding the CID 275, I want to emphasize the reason that I raised the CID,
In TB termination case a sensing responder is unware of the MSID which is involved in the SBP case, if the sensing responder send a sensing setup termination frame with the
MSID to the AP(SBP responder), the consequence is that the number of the sensing responders may not be fulfilled with the requirement of the SBP request frame during SBP setup, and it may trigger the SBP termination procedure. Best regards Xiandong
发件人:
周培(Pei Zhou) <00001462c7c6c67a-dmarc-request@xxxxxxxxxxxxxxxxx>
Hi Claudio and others who concern about this CR, Attached please find revision 1 of this CR doc. 1) For the vice versa issue, I use the similar text to SBP Termination
(suggested by Rojan in the chat box) to solve CID 634, as shown below:
11.21.18.8
Sensing measurement setup(#132) termination
Replace:
A sensing initiator (or sensing responder) may initiate termination of one or more sensing measurement setups by transmitting a Sensing Measurement Setup Termination frame with the Measurement Setup IDs of the measurement setups to be
terminated to a sensing responder (or sensing initiator).
by: Sensing measurement setup(s) may be terminated at any time by either the sensing initiator
or the sensing responder by transmitting a Sensing Measurement Setup Termination frame. (#634) 2) For the subclause Overview of Clause WLAN sensing procedure, the following changes are made:
CID 138:
instance is changed to setup, as shown below:
l
A sensing measurement setup is active until terminated in a sensing measurement setup termination.
CID 139: I am open to
keep or delete the following sentence:
l
In the sensing session termination, a sensing session is terminated. Please feel free to provide your comments and suggestions. Thanks. Best regards, Pei OPPO 本电子邮件及其附件含有OPPO公司的保密信息，仅限于邮件指明的收件人使用（包含个人及群组）。禁止任何人在未经授权的情况下以任何形式使用。如果您错收了本邮件，请立即以电子邮件通知发件人并删除本邮件及其附件。 This e-mail and its attachments contain confidential information from OPPO, which is intended only for the person or entity whose
address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this
e-mail in error, please notify the sender by phone or email immediately and delete it! To unsubscribe from the STDS-802-11-TGBF list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1
To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1 |