Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGM] Question on TGad roll-in



--- This message came from the IEEE 802.11 Task Group M Technical Reflector ---

I prefer Adrian's approach as well ... for what it's worth.

 

RR

 


From: ***** IEEE stds-802-11-tgm List ***** [mailto:STDS-802-11-TGM@xxxxxxxx] On Behalf Of Matthew Fischer
Sent: Sunday, March 17, 2013 7:50 AM
To: STDS-802-11-TGM@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGM] Question on TGad roll-in

 

 

I prefer the approach that you have taken and if there are changes needed, there can be LB comments that suggest what those changes should be.

 

Matthew Fischer

 

From: ***** IEEE stds-802-11-tgm List ***** [mailto:STDS-802-11-TGM@xxxxxxxx] On Behalf Of Stephens, Adrian P
Sent: Sunday, March 17, 2013 4:37 AM
To: STDS-802-11-TGM@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGM] Question on TGad roll-in

 

--- This message came from the IEEE 802.11 Task Group M Technical Reflector ---

Dear TGmc folks,

 

In the TGad roll-in,  there are a number of places where changes by REVmc were incompatible with changes by TGad.

One specific area is the PHY characteristics,  where we removed dual PMD,RF and replaced by PHY.  

 

In the Roll-in,  I did a “merge” to produce a table that matches the other PHYs.  Carlos believes I went too far,  and should

have implemented the table as present in .11ad,   which would then necessitate comments on the D2 ballot to fix them.

 

I realize and accept that the changes I made were not editorial,  but I do claim they are obvious (i.e. there is only one possible

final outcome).  I’ve also noted where such changes were made with Editor Notes.

 

I would like to establish from the group whether they approve my approach,  or would prefer to see a stricter roll-in. 

Once we establish a group position,   I will know how to respond to D1.1 review comments on this subject.

 

 

Best Regards,

 

Adrian P STEPHENS

Tel: +44 (1793) 404 825

Tel: +44 (7920) 084 900

Tel: +1 (408) 239 7485

 

----------------------------------------------
Intel Corporation (UK) Limited
Registered No. 1134945 (England)
Registered Office: Pipers Way, Swindon SN3 1RJ
VAT No: 860 2173 47

 

_______________________________________________________________________________

IF YOU WISH to be Removed from this reflector, PLEASE DO NOT send your request to this CLOSED reflector. We use this valuable tool to communicate on the issues at hand.

SELF SERVICE OPTION: Point your Browser to - http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGM and then amend your subscription on the form provided. If you require removal from the reflector press the LEAVE button.

Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________

_______________________________________________________________________________

IF YOU WISH to be Removed from this reflector, PLEASE DO NOT send your request to this CLOSED reflector. We use this valuable tool to communicate on the issues at hand.

SELF SERVICE OPTION: Point your Browser to - http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGM and then amend your subscription on the form provided. If you require removal from the reflector press the LEAVE button.

Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________ _______________________________________________________________________________

IF YOU WISH to be Removed from this reflector, PLEASE DO NOT send your request to this CLOSED reflector. We use this valuable tool to communicate on the issues at hand.

SELF SERVICE OPTION: Point your Browser to - http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGM and then amend your subscription on the form provided. If you require removal from the reflector press the LEAVE button.

Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________