I was asked to start a thread on CID 1992:
The proposed change is:
In 3.2, change the definition of "beacon interval"
[from
beacon interval: The time interval between two consecutive target beacon transmission times (TBTTs).]
to:
beacon interval: An interval of time equal to the time interval between two consecutive target beacon transmission times (TBTTs).
NOTE--A beacon interval is a duration; it does not necessarily start at a TBTT.
In 10.2.3.2 change "within an interval of time equal to one beacon interval" to "within one beacon interval"
In [10.39.2] (first one) change "within a beacon interval" to "in the time interval between TBTTs" (or "within a beacon interval starting at a TBTT"?)
In [10.39.2] (others) change "within a beacon interval" to "within a beacon interval starting at a TBTT"
See also slides 5-8 of 21/0448.
Thanks,
Mark
--
Mark RISON, Standards Architect, WLAN English/Esperanto/Français
Samsung Cambridge Solution Centre Tel: +44 1223 434600
Innovation Park, Cambridge CB4 0DS Fax: +44 1223 434601
ROYAUME UNI WWW:
http://www.samsung.com/uk
To unsubscribe from the STDS-802-11-TGM list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGM&A=1