Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11] Liaison response to 3GPP RAN2



--- This message came from the IEEE 802.11 Working Group Reflector ---

G’day Stephen

 

I had a quick look …

 

Given that “RSNI is calculated as RCPI minus ANPI which both has accuracy requirements of ±5 dB” shouldn’t the accuracy of RSNI be ±10 dB and not ±5 dB?

 

And what was the basis of the other answers?

 

Andrew

 

From: *** IEEE stds-802-11 List *** [mailto:STDS-802-11@xxxxxxxx] On Behalf Of Stephen McCann
Sent: Thursday, 8 May 2014 6:58 PM
To: STDS-802-11@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11] Liaison response to 3GPP RAN2

 

--- This message came from the IEEE 802.11 Working Group Reflector ---

Dear all,

           there will be a discussion to create a liaison response to 11-14-0519r0 (from 3GPP RAN) during the TGmc session on Wednesday PM (it may be either PM1 or PM2 depending on the TGmc agenda).

An initial draft has been put together by Guido and myself and is now on the server as document:

<https://mentor.ieee.org/802.11/dcn/14/11-14-0561-00-0000-liaison-response-to-3gpp-on-rcpi.docx>

Please can you review this and either send me comments, or attend the meeting.

Kind regards

Stephen

_______________________________________________________________________________

If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.

Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11 and then press the LEAVE button.

If there is no LEAVE button here, try http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-RO.

Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________

_______________________________________________________________________________

If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.

Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11 and then press the LEAVE button.

If there is no LEAVE button here, try http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-RO.

Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html _______________________________________________________________________________