[STDS-802-11] IEEE 802.11 Recirculation Letter Ballot 224 for 802.11aq Draft 7.0 Closes Soon
--- This message came from the IEEE 802.11 Working Group Reflector ---
IEEE 802.11(TM) Letter Ballot 224
To: IEEE 802.11 Voters,
The 802.11 Working Group WG Recirculation Letter Ballot 224 (LB224) is a
Letter Ballot on the question "Should P802.11aq D7.0 be forwarded to
Sponsor Ballot?".
This Letter Ballot opened at Sat Sep 10, 2016 at 23:59 Eastern Time USA
(11:59PM) and will close 15 days later on Sun Sep 25, 2016 at 23:59
Eastern Time USA (11:59pm). All necessary documents are available in the
instructions that can be found on the IEEE 802.11 web site at
http://www.ieee802.org/11/LetterBallots/LB224aq/LB224_instructions.html.
Important:
o This is a 15-day Recirculation letter ballot and the ballot group
(i.e., those that may vote) for this ballot is the same as that used for
the original letter ballot that passed the 75% threshold for 802.11aq,
i.e., Letter Ballot 216.
o All current voter members of 802.11 are required to vote on this
ballot series.
o If you have voted on any of LB 216, 219, 221 and 222, you are not
required to vote on this ballot. Your most recent ballot will be carried
forward.
o If you wish to change your vote, you must respond to this ballot.
o You must follow these instructions to vote. Do not send an email to
vote. Voting by any method other than the web-based process described
here will invalidate your vote.
o Failure to follow these instructions will result in your vote being
discarded as an invalid vote.
o The draft is password protected in accordance with IEEE 802
Policies and Procedures. To obtain the draft, use the username and the
password supplied to active members for the 802.11 WG private area.
Thank you for participating in Letter Ballot 224.
Adrian Stephens, IEEE 802.11 Working Group Chair
E-mail: Adrian.P.Stephens@xxxxxxxx
Stephen McCann, IEEE 802.11 TGaq Chair
E-mail: smccann@xxxxxxxxxxxxxx
_______________________________________________________________________________
If you wish to be removed from this reflector, do not send your request to this reflector - it will have no effect.
Instead, go to http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11 and then press the LEAVE button.
If there is no LEAVE button here, try http://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-RO.
Further information can be found at: http://www.ieee802.org/11/Email_Subscribe.html
_______________________________________________________________________________